Read Sharp MX-PE10 FIERY (serv.man35) Technical Bulletin online
Page 1 of 3
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT203523
Product name
MX-PE10
Release date
5 Feb 2014
Files included in this release
File name
File size
Md5 Checksum
FIT203523.exe
4.66MB
c8f5c21c5cbb6d3c22f65f20e9489fa2
Issue(s) addressed with this release
• FIT203523: Post Release Patch for MXPE10 v1.1
• FIT203523: Job waiting to print is observed while printing a multipage duplex job with more
than 8copies+Slip sheet: ON+ Group with shift
• FIT204873: Fiery exited while printing 20 or more than 20 page duplex job with Slip sheet
,Sort and n copies
• FIT 203147: Job waiting to print observed on printing booklet job with Cover source set to
Tray1 and size set to A4SEF
Steps to reproduce the Issue(s)
• FIT203523: Job waiting to print is observed while printing a multipage duplex job with more
than 8copies+Slip sheet: ON+ Group with shift
1. Import a multipage PDF file to CWS hold queue.
2. Launch Job Properties and go to Job info tab
Copies 9
3. Go to Layout tab
Duplex to Top-top
4. Media tab
Slip sheet ON
5. Select Finishing tab Sort Mode
Group with Shift.
6. Print the job
Result: Job hang is observed. The job can be cancelled
Page 2 of 3
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
• FIT204873: Fiery exited while printing 20 or more than 20 page duplex job with Slip sheet ,
Sort and n copies
1. Import any file more than 20 pages to the hold queue
2. Open Job Properties
Job info copies more than 1
3. Layout tab
Duplex Top-Top
4. Media Tab
Slip sheet ON
5. Go to Finishing tab
Select Sort mode Sort with Shift or Sort without shift
6. Print the job
Result: It prints 1copy of the job and the slip-sheet and then it prints 2nd copy of the job 6
sheets and then the Fiery gets exited and in engine Paper jam occurs.
sheets and then the Fiery gets exited and in engine Paper jam occurs.
• FIT 203147:Job waiting to print observed on printing booklet job with Cover source set to
Tray1 and size set to A4SEF
1. Open a multipage PDF document
2. Go to File
Print and select the installed driver name
3. Click on Properties
Layout tab Booklet; Paper Size for 2-Up printing t
A4SEF; Cover Paper
Tray1.
4. Go to Media tab
Document Size A4LEF.
5. Print the job.
Result: Job was seen in waiting to print state without any message in CWS.
Before installing FIT203523.exe
1 Known issues listed below, read before installing FIT203523.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT203523 patch:
• None
• None
3 Do NOT install any of the following patch(es) after installing FIT203523 patch. If you must
install any of the patch(es) below, do so before installing FIT203523 patch:
• None
• None
Page 3 of 3
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT203523.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT203523.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT203523.
6 Verify that the System Updates Log section contains the patch number FIT203523.