Read Sharp MX-FN21 / MX-FN22 / MX-PN13 (serv.man6) Service Manual online
MX-7040N MX-FN21/FN22 (FINISHER/SADDLE STITCH FINISHER) 20 – 3
D. Cushion attachment
MX-FN21
MX-FN22
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Staple unit stale case installation
1)
Open the front cover of the finisher. Insert the staple unit staple
case into the staple unit until it clicks.
case into the staple unit until it clicks.
B. Spacer attachment
1)
Attach the spacer to the inside of [A] at the groove in the right
side of the upper cover of the finisher. Since the groove is
shorter than the spacer, put the spacer in parallel with the top
line where there is no groove.
side of the upper cover of the finisher. Since the groove is
shorter than the spacer, put the spacer in parallel with the top
line where there is no groove.
When the groove is in the front side:
When the groove is in the rear side:
Cushion attachment
position
position
⾍ઃၮḰ
Reference of cushion on.
(Upper cabinet side tier)
(Upper cabinet side tier)
Reference of cushion on.
(Upper cabinet lower edge)
(Upper cabinet lower edge)
Cushion attachment
position
position
Reference of cushion on.
(Upper cabinet side tier)
(Upper cabinet side tier)
Reference of cushion on.
(Upper cabinet lower edge)
(Upper cabinet lower edge)
[A]
[A]
Click on the first or last page to see other MX-FN21 / MX-FN22 / MX-PN13 (serv.man6) service manuals if exist.