AR-C270 (serv.man13). (Section 8) Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 7

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub

43

1

Used to set the fusing temperature in each
operation mode.

Setting

Fixing (Fusing)

Operation

7

Used to adjust the fusing oil supply amount.
(Adjustment of oil motor ON time and oil
motor ON interval)

Adjustment

Fixing (Fusing)

Operation

44

1

Used to set enable/disable of correction
operations in the image forming (process)
section.

Setting

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Operation

2

Used to check the operation of the
temperature sensor and the humidity sensor
for correction of the image process section.
(The sensor detection level can be
monitored.)

Operation test/check

Operation

4

Used to set the target image (reference)
density level in correction (process
correction) operations in the image forming
section.

Setting

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Picture quality

Density

5

Used to set the correction start developing
bias voltage in correction (process
correction) operations in the image forming
section.

Setting

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Developer/
Toner Hopper

Operation

6

Used to forcibly execute the image forming
section correction (process correction).

Operation test/check

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Operation

9

Used to check the data on the image forming
section correction (process correction)
(corrected main charger grid voltage, the
developing bias voltage, the laser power, etc,
in each print mode). (This simulation allows
to check if the correction operation is
performed normally.)

Operation data
output/Check
(Display/Print)

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Data

Operation data
(Machine
condition)

12

Used to check the toner image patch density
data in the image forming section correction
(process correction). This simulation allows
to check if the correction operation is
performed normally.)

Operation data
output/Check
(Display/Print)

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Data

Operation data
(Machine
condition)

13

Used to adjust the image density sensor (for
color) sensitivity (gain).

Adjustment

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Copy

14

Used to monitor the output level of the fusing
temperature sensor, the machine
temperature sensor, and the humidity sensor.

Operation data
output/Check
(Display/Print)

Others

16

Used to check the toner concentration
correction result. (This simulation allows to
check if correction is executed properly or
not.)

Operation data
output/Check
(Display/Print)

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Developer/
Toner Hopper

Data

Operation data
(Machine
condition)

20

Used to adjust the phase of OPC drum
deflection. (Used to adjust deflection phases
of four OPC drums.) (Old)

Adjustment

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Photo
conductor

Operation

21

Used to store color balance adjustment data.
(Half tone image correction initial setting)
(After execution of color balance adjustment
with SIM 46-21, this simulation must be
executed.)

Setting

Picture quality

22

Used to check each color toner patch image
density UITU in half tone image forming
section correction (process correction). (This
simulation allows to check if correction
operation is performed normally.)

Operation data
output/Check
(Display/Print)

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Data

Operation data
(Machine
condition)

23

Used to adjust the image density sensor
position (main scan direction). (The position
is adjusted when toner patch is formed.)

Adjustment

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Copy

24

Used to check the half tone correction result.
(This simulation allows to check if correction
is executed properly or not.)

Operation data
output/Check
(Display/Print)

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Data

Operation data
(Machine
condition)

25

Used to check the half tone correction result.
(This simulation allows to check if correction
is executed properly or not.)

Operation data
output/Check
(Display/Print)

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Data

Operation data
(Machine
condition)

8 –  7