AR-C270 (serv.man13). (Section 8) Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 6

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub

26

55

Used to set the fusing capability (image
process) in the heavy paper mode.
(AR-C150)
Used to select the gamma characteristics in
the color copy mode. (AR-C250/C160/C270)

Setting

ICU

Operation

27

1

Used to set the specifications for operations
in case of communication trouble between
the host computer and MODEM (machine
side). (When communication trouble occurs
between the host computer  MODEM and
the machine, the self diag display  (U7-00) is
printed and setting for inhibition of print or not
is made.)

Setting

Communication unit
(TEL/LIU/MODEM etc.)

Specifications

Operation mode
(Common)

2

Used to set or change the host
computer/MODEM number. (This setting is
required when a communication is made
between the copier and the computer
through MODEM.)

Setting

Communication unit
(TEL/LIU/MODEM etc.)

Data

User data

3

Used to set and change the ID numbers of
the copier, the host computer/MODEM. (This
setting is required when a communication is
made between the copier and the computer
through MODEM.)

Setting

Communication unit
(TEL/LIU/MODEM etc.)

Data

Communication

4

Used to enter the service start time and
service end time for management of
servicing. (The data can be checked with the
host computer.)

Setting

Communication unit
(TEL/LIU/MODEM etc.)

Data

Communication

5

Used to enter the machine TAG No. (This
function allows to check the TAG No. of the
machine with the host computer.)

Setting

Communication unit
(TEL/LIU/MODEM etc.)

Data

User data

6

Used to set ON/OFF of service call sending
to the service center by use of RIC when
trouble occurred in the machine. (The
service call is not sent automatically, but sent
manually.)

Setting

Communication unit
(TEL/LIU/MODEM etc.)

Specifications

Others

29

4

Used to set the print count system in the
printer mode. (AR-C150/C250/C160/C270)

Setting

Memory

Counter

30

1

Used to check the operation of sensors and
detectors in the paper feed, paper transport,
paper exit sections and the related circuits.

Operation test/check

Operation

2

Used to check the operation of sensors and
detectors in the paper feed section and the
related circuits. (The operation of the paper
feed sensors and detectors can be
monitored with the LCD display.)

Operation test/check

Paper transport

Operation

33

1

Used to check the operation of the card
reader and the sensors and the related
circuits. (The card reader sensor operation
can be monitored with the LCD display.)
(AR-C150/C250/C160/C270)

Operation test/check

Others

Operation

40

1

Used to check the operation of the manual
feed tray paper size detector and the related
circuit. (The operation of the manual feed
tray paper size detector can be monitored
with the LCD display.)
(AR-C150/C250/C160/C270)

Operation test/check

Paper transport

Operation

2

Used to adjust the manual feed tray paper
width detector detection level.
(AR-C150/C250/C160/C270)

Adjustment

Paper transport

Operation

4

Used to check the OHP sensor and its
control circuit. (AR-C150/C250/C160/C270)

Operation test/check

Paper transport

Operation

5

Used to adjust the detection level of the OHP
sensor. (AR-C150/C250/C160/C270)

Adjustment

Paper feed

Operation

6

Used to set the OHP sensor adjustment
parameter. (AR-C150/C250/C160/C270)

setting

Paper feed

Operation

41

1

Used to check the operation of the document
size sensor and the related circuit. (The
operation of the document size sensor can
be monitored with the LCD display.)

Operation test/check/
Operation data
Output/Check
(Display/Print)

Others

Operation

2

Used to adjust the document size sensor
detection level.

Adjustment

Others

Operation

3

Used to check the operation of the document
size sensor and the related circuit. (The
document size sensor output level can be
monitored with the LCD display.)

Operation test/check

Others

Operation

8 –  6