Read Panasonic CS-XE9HKD / CS-XE12HKD / CU-XE9HKD / CU-XE12HKD Service Manual online
29
4. Cable connection to the power supply through knife switch (Disconnecting means).
• Connect the approved polychloroprene sheathed power supply cable (3 x 1.5 mm
2
), type designation 245 IEC 57 or heavier
cord to the terminal board, and connect the other end of the cable to knife switch (Disconnecting means).
Note: Knife switch (Disconnecting means) should have minimum 3.5 mm contact gap.
• Secure the cable onto the control board with the holder (clamper).
Click on the first or last page to see other CS-XE9HKD / CS-XE12HKD / CU-XE9HKD / CU-XE12HKD service manuals if exist.