Read Panasonic CS-XE9HKD / CS-XE12HKD / CU-XE9HKD / CU-XE12HKD Service Manual online
26
11.2.4.
Connect the Cable to the Indoor
Unit
Unit
1. The inside and outside connecting cable can be
connected without removing the front grille.
2. Connecting cable between indoor unit and outdoor unit
shall be approved polychloroprene sheathed 4
u 1.5 mm
2
flexible cord, type designation 245 IEC 57 or heavier
cord.
cord.
• Ensure the colour of wires of outdoor unit and the termi-
nal Nos. are the same to the indoor’s respectively.
• Earth lead wire shall be longer than the other lead wires
as shown in the figure for the electrical safety in case of
the slipping out of the cord from the anchorage.
the slipping out of the cord from the anchorage.
• Secure the cable onto the control board with the holder
(clamper).
Click on the first or last page to see other CS-XE9HKD / CS-XE12HKD / CU-XE9HKD / CU-XE12HKD service manuals if exist.