DPP-MS300, DPP-MS300E - Sony Other Service Manuals Service Manual (repair manual)

dpp-ms300, dpp-ms300e service manual
Model
DPP-MS300 DPP-MS300E
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
37.73 KB
Type
PDF
Document
Service Manual
Brand
Device
Other Service Manuals / CORRECTION-1
File
dpp-ms300-dpp-ms300e.pdf
Date
Next: Sony DPP-SV55 Service Manual

Read Sony DPP-MS300 / DPP-MS300E Service Manual online

– 2 –
Sony Corporation
Printing Technologies  Company
9-928-127-91
99F05550-1
Printed in Japan  © 1999. 6
Published by VAIO Customer Link
Page
INCORRECT
CORRECT
4-3
DPP-MS300 (US, Canadian models)
%
%
%
%
%
Page
INCORRECT
CORRECT
4-3
DPP-MS300E (AEP, UK models)
%
%
%
%
Note 2:
To print the stair-step test pattern, turn on the power switch while
pressing the S1707 (CAPTURE) and S1717 (ENTER) on the SW-
40 board.
(Press the S1707 (CAPTURE) and S1717 (ENTER) until a peep
is heard.) Set the S1701 (Rotaly switch) to the    position, and
press the S1706 (print), then the print will start.
Note 1:
To print the stair-step test pattern, turn on the power switch while
pressing the S1707 (CAPTURE) and S1717 (ENTER) on the SW-
40 board.
(Press the S1707 (CAPTURE) and S1717 (ENTER) until a peep
is heard.) Set the S1701 (Rotaly switch) to the    position, and
press the S1706 (print), then the print will start.
Adjustment Procedure:
(1)
To print the stair-step test pattern, turn on the power switch
while pressing the S1707 (CAPTURE) and S1717 (ENTER)
on the SW-40 board.
(Press the S1707 (CAPTURE) and S1717 (ENTER) until a
peep is heard.) Set the S1701 (Rotaly switch) to the     posi-
tion, and press the S1706 (print), then the print will start.
Mode
Test mode (Note 1)
Signal
Test pattern (Stair-step)
Measuring points
+: CN1943 2 pin (MD-40 board)
–: CN1943 3 pin
Measuring instrument
Digital Voltmerter
Adjustment part
VR201
Specification
Print density should be the same as the sample
Note 2:
To print the stair-step test pattern, turn on the power switch while
pressing the S1714 (SAVE) and S1717 (ENTER) on the SW-40
board.
(Press the S1714 (SAVE) and S1717 (ENTER) until a peep is
heard.) Set the S1701 (Rotaly switch) to the 
 position, and
press the S1706 (print), then the print will start.
Adjustment Procedure:
(1)
To print the stair-step test pattern, turn on the power switch
while pressing the S1714 (SAVE) and S1717 (ENTER) on
the SW-40 board.
(Press the S1714 (SAVE) and S1717 (ENTER) until a peep
is heard.) Set the S1701 (Rotaly switch) to the     position,
and press the S1706 (print), then the print will start.
Mode
Test mode (Note 1)
Signal
Test pattern (Stair-step)
Measuring points
+: CN1943 2 pin (MD-40 board)
–: CN1943 3 pin
Measuring instrument
Digital Voltmerter
Adjustment part
VR201
Specification
Print density should be the same as the sample
Note 2:
To print the stair-step test pattern, turn on the power switch while
pressing the S1707 (CAPTURE) and S1717 (ENTER) on the SW-
40 board.
(Press the S1707 (CAPTURE) and S1717 (ENTER) until a peep
is heard.) Set the S1701 (Rotaly switch) to the    position, and
press the S1706 (print), then the print will start.
Adjustment Procedure:
(1)
To print the stair-step test pattern, turn on the power switch
while pressing the S1707 (CAPTURE) and S1717 (ENTER)
on the SW-40 board.
(Press the S1707 (CAPTURE) and S1717 (ENTER) until a
peep is heard.) Set the S1701 (Rotaly switch) to the     posi-
tion, and press the S1706 (print), then the print will start.
Mode
Test mode (Note 2)
Signal
Test pattern (Stair-step)
Measuring points
+: CN1943 2 pin (MD-40 board)
–: CN1943 3 pin
Measuring instrument
Digital Voltmerter
Adjustment part
VR201
Specification
Print density should be the same as the sample
Note 2:
To print the stair-step test pattern, turn on the power switch while
pressing the S1714 (SAVE) and S1717 (ENTER) on the SW-40
board.
(Press the S1714 (SAVE) and S1717 (ENTER) until a peep is
heard.) Set the S1701 (Rotaly switch) to the 
 position, and
press the S1706 (print), then the print will start.
Adjustment Procedure:
(1)
To print the stair-step test pattern, turn on the power switch
while pressing the S1714 (SAVE) and S1717 (ENTER) on
the SW-40 board.
(Press the S1714 (SAVE) and S1717 (ENTER) until a peep
is heard.) Set the S1701 (Rotaly switch) to the     position,
and press the S1706 (print), then the print will start.
Mode
Test mode (Note 2)
Signal
Test pattern (Stair-step)
Measuring points
+: CN1943 2 pin (MD-40 board)
–: CN1943 3 pin
Measuring instrument
Digital Voltmerter
Adjustment part
VR201
Specification
Print density should be the same as the sample
DPP-MS300/DPP-MS300E
Page of 2
Display

Download Sony DPP-MS300 / DPP-MS300E Service Manual (Repair Manual)

Here you can read online and download Sony DPP-MS300 / DPP-MS300E Service Manual in PDF. DPP-MS300 / DPP-MS300E service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DPP-MS300 / DPP-MS300E Other Service Manuals. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

DPP-MS300 / DPP-MS300E Service Manuals

Preview DownloadPagesSize
DPP-MS300 Service Manual 88 19.47 MB
DPP-MS300E Service Manual 88 19.53 MB

Random: