Read Sony DPF-C1000 / DPF-C700 Service Manual online
Ver.
Date
History
Contents
S.M.Rev
issued
DPF-C700/C1000
Sony Corporation
SERVICE MANUAL
Revision History
989325403.pdf
2012F33-1
© 2012.06
Published by Sony Techno Create Corporation
Ver. 1.2 2012.06
DIGITAL PHOTO FRAME
9-893-254-03
DPF-C700/C1000
Canadian Model
AEP Model
Chinese Model
DPF-C700/C1000
UK Model
DPF-C1000
E Model
Australian Model
DPF-C700
Photo: DPF-C1000
1.0
1.1
1.2
2011.07
2011.09
2012.06
Official Release
Revised-1
A1 (SMR-11034)
A1 (SMR-11034)
Revised-2
A2 (SMR-12016)
A2 (SMR-12016)
—
• Addition of WHITE and RED type (DPF-C700: Chinese model)
• Addition of NOTE4 (DPF-C1000)
S.M. Revised: Top cover,
• Addition of NOTE4 (DPF-C1000)
S.M. Revised: Top cover,
Page 2
,
Page 3
,
Page 4
,
Page 5
• Addition of Canadian and Brazilian models (DPF-C700)
• Change of Part No. LCD ASSY (DPF-C700)
S.M. Revised: Top cover,
• Change of Part No. LCD ASSY (DPF-C700)
S.M. Revised: Top cover,
Page 2
,
Page 3
,
Page 5
—
Yes
Yes
Revised-2
Replacement of the previously issued
SERVICE MANUAL 9-893-254-02 with
this manual.
SERVICE MANUAL 9-893-254-02 with
this manual.
Ver. 1.2 2012.06
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
DPF-C700/C1000
– 2 –
SPECIFICATIONS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE WITH
MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
lead free mark due to their particular size.)
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than ordi-
• Unleaded solder melts at a temperature about 40°C higher than ordi-
nary solder.
Ordinary soldering irons can be used but the iron tip has to be applied
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about
350°C.
Caution: The printed pattern (copper foil) may peel away if the heated
tip is applied for too long, so be careful!
Ordinary soldering irons can be used but the iron tip has to be applied
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about
350°C.
Caution: The printed pattern (copper foil) may peel away if the heated
tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such as
on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such as
on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be
added to ordinary solder.
added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes and
bridges.
bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
6. Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 350°C during
repairing.
• Do not touch the soldering iron on the same conductor of the circuit
board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
Photo frame
Model name
DPF-C1000
DPF-C700
LCD screen
LCD panel
26 cm/
10.1-inches,
TFT active
matrix
10.1-inches,
TFT active
matrix
18 cm/7-inches,
TFT active
matrix
TFT active
matrix
Total number of
dots
dots
1,843,200 dots
(1,024 × 3 (RGB)
× 600 dots)
(1,024 × 3 (RGB)
× 600 dots)
1,152,000 dots
(800 × 3 (RGB)
× 480 dots)
(800 × 3 (RGB)
× 480 dots)
Effective display area
Display aspect
ratio
ratio
16:10
16:10
Actual viewable
size
size
23.4 cm/9.2-
inches
inches
16.2 cm/6.4-
inches
inches
Total number of
dots
dots
1,628,748 dots
(914 × 3 (RGB)
× 594 dots)
(914 × 3 (RGB)
× 594 dots)
1,012,464 dots
(712 × 3 (RGB)
× 474 dots)
(712 × 3 (RGB)
× 474 dots)
LCD backlight life
20,000 hours (before brightness of the backlight is reduced to half )
Input/Output connectors
USB connector (A TYPE, Hi-Speed USB)
“Memory Stick PRO” (Duo)/SD memory card slots
Compatible file formats
*1
JPEG
DCF 2.0 compatible, Exif 2.3 compatible, JFIF(Baseline JPEG with 4:4:4, 4:2:2 or 4:2:0
format)
format)
TIFF
Exif 2.3 compatible
BMP
1, 4, 8, 16, 24, 32 bit Windows format
RAW
*2
SRF, SR2, ARW 2.2(preview only)
Maximum picture elements
*3
8,000 × 6,000
File system
FAT12/16/32
Image file name
DCF format, 256 characters within 8th hierarchy
Maximum number of files that can be handled 4,999 files
Power requirements
DC IN jack, DC 5V
Power
consumption
consumption
With
the AC
adaptor
the AC
adaptor
At the maximum
load
load
9.5 W
8.5 W
Normal mode
6.2 W
5.4 W
Without
the AC
adaptor
the AC
adaptor
At the maximum
load
load
7.5 W
6.5 W
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Dimensions
(width/height/depth)
(width/height/depth)
With the stand
spread out
spread out
Approx. 262.1
mm × 180.6
mm × 61.6 mm
(10
× 7
2
mm × 180.6
mm × 61.6 mm
(10
× 7
2
Approx. 188.8
mm × 132.4
mm × 61.6 mm
(7
5
2
mm × 132.4
mm × 61.6 mm
(7
5
2
When hanging on
the wall
the wall
Approx. 262.1
mm × 180.6
mm × 27.3 mm
(10
× 7
1
mm × 180.6
mm × 27.3 mm
(10
× 7
1
Approx. 188.8
mm × 132.4
mm × 27.3 mm
(7
5
1
mm × 132.4
mm × 27.3 mm
(7
5
1
Mass
Approx. 515 g
(1 lb 2
(1 lb 2
)
Approx. 283 g
(10 oz)
(10 oz)
Included accessories
Refer to “Checking the included items” on the front side.
AC adaptor
Model name
AC-P5022
Power requirements
AC100 V - 240 V, 50 Hz/60 Hz, 0.4 A
Rated output voltage
DC 5 V, 2.2 A
Dimensions (width/height/depth)
Approx. 79 mm × 34 mm × 65 mm
(3
(excluding the protruding parts)
(3
(excluding the protruding parts)
Mass
Approx
)
See the label of AC adaptor for more details.
Design and specifications are subject to change without notice.
*
1
Some of the files may not be compatible depending on the type of data.
*
2
RAW files of a Sony α camera are displayed as thumbnail preview.
*
3
17 × 17 or more are required. An image with an aspect ratio of 20:1 or more may not be displayed properly. Even if the aspect ratio is less than 20:1,
display problem may occur in thumbnails, slideshow or other occasitions.
On trademarks and License
, Cyber-shot,
, “Memory Stick”, and
are trademarks or registered trademarks of Sony
Corporation.
SD Logo, SDHC Logo are trademarks of SD-3C, LLC.
All other companies and product names mentioned herein may be the trademarks or registered trademarks of
All other companies and product names mentioned herein may be the trademarks or registered trademarks of
their respective companies. Furthermore, ™ and ® are not mentioned in each case in this manual.
Libtiff
Copyright © 1988 - 1997 Sam Leffler
Copyright © 1991 - 1997 Silicon Graphics, Inc.
Copyright © 1991 - 1997 Silicon Graphics, Inc.
Model
Destination
Color
Black
White
Red
Swarovski
Black
Swarovski
White
DPF-C700
Canadian
z
AEP
z
z
z
East European
z
z
z
E (Except Middle East, Hong Kong, Korean and Chinese etc.)
z
z
Brazilian
z
Hong Kong, Middle East
z
Taiwan
z
Korean
z
Australian
z
Chinese
z
z
z
z
DPF-C1000
Canadian
z
AEP
z
East European
z
UK
z
Chinese
z
• COLOR
VARIATION
Ver. 1.2 2012.06
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
DPF-C700/C1000
– 3 –
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
• Refer to “COLOR VARIATION” on page 2
about color variation of model and destina-
tion.
tion.
1-1. DPF-C700
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
1
4-296-201-01
COVER, FRONT (BLACK)
1
4-296-207-01
COVER, FRONT (SWAROVSKI BLACK)
1
4-296-208-01
COVER, FRONT (SWAROVSKI WHITE)
1
4-410-156-01
COVER, FRONT (WHITE)
1
4-410-157-01
COVER, FRONT (RED)
2
3-080-206-21 SCREW,
TAPPING,
P2
3
A-1843-679-A MAIN BOARD, COMPLETE
4
4-295-986-01 SW
(MENU,
B, b, ENTER, 1)
(for BLACK, SWAROVSKI BLACK, RED)
4
4-296-209-01 SW
(MENU,
B, b, ENTER, 1)
(for WHITE, SWAROVSKI WHITE)
5
A-1843-680-A PANEL
ASSY,
REAR
(for BLACK, SWAROVSKI BLACK, RED)
5
A-1843-682-A PANEL ASSY, REAR (for WHITE, SWAROVSKI WHITE)
6
3-080-206-21 SCREW,
TAPPING,
P2
(for BLACK, SWAROVSKI BLACK, RED)
6
7-685-103-14
SCREW +P 2X5 TYPE2 NON-SLIT
(for WHITE, SWAROVSKI WHITE)
LCD901
A-1894-122-A SERVICE
(LCD)
ASSY
LCD901
4
6
2
1
(Note1)
5
(Note1)
3
(Note2, 3)
Note
1. EXPLODED VIEWS
Note1:
Follow the disassembly procedure in the numerical order given.
3 two claws
4 Remove all claws while rounding in outer.
3 claw
3 claw
6 front cover
– Rear bottom view –
– Front bottom view –
3 two claws
5
1 two screws
1 two screws
JIG
When disassembling the unit,
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front
cover and the rear cover assy and remove.
Note: Please spread a sheet under a
unit not to injure front panel.
Note2: When boards installed by this unit are defective, replace the
complete mouted board. Individual electrical parts that the
mount is done cannot be exchanged.
mount is done cannot be exchanged.
Note3: When the MAIN board in this unit is replaced, it is necessary
to set destination. Execute the setting of destination referring
to “DESTINATION SETTING” (page 5).
to “DESTINATION SETTING” (page 5).
Ver. 1.2 2012.06
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
DPF-C700/C1000
– 4 –
Note
1-2. DPF-C1000
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
4-295-985-01 PANEL,
FRONT
52
3-080-206-21 SCREW,
TAPPING,
P2
53
A-1843-436-A MAIN BOARD, COMPLETE
54
4-295-986-01 SW
(MENU,
B, b, ENTER, 1)
55
A-1843-439-A REAR
PANEL
ASSY
DCJ1
A-1843-437-A DC JACK (DC IN 5V
)
LCD901 A-1843-081-A LCD
ASSY
SERVICE
LCD901
(Note4)
DCJ1
52
52
52
54
51
(Note1)
55
(Note1)
53
(Note2, 3)
Note1:
Follow the disassembly procedure in the numerical order given.
4 Remove all claws while rounding in outer.
6 front cover
– Rear bottom view –
– Front bottom view –
3 four claws
3 four claws
3 four claws
3 four claws
1 two screws
1 two screws
5
Note: Please spread a sheet under a
unit not to injure front panel.
JIG
When disassembling the unit,
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front
cover and the rear cover assy and remove.
Note2: When boards installed by this unit are defective, replace the
complete mouted board. Individual electrical parts that the
mount is done cannot be exchanged.
mount is done cannot be exchanged.
Note3: When the MAIN board in this unit is replaced, it is necessary
to set destination. Execute the setting of destination referring
to “DESTINATION SETTING” (page 5).
to “DESTINATION SETTING” (page 5).
Note4: When exchanging LCD ASSY (LCD901), please install it after
peeling off four sponges of new LCD ASSY (LCD901).
Ver. 1.1 2011.09
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.