Read Sony SAL18135 Service Manual online
4-2
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
4-1-2. Adjustment Flow Chart
Check/Adjustment Order
Optical Axis Adjustment
Section 4-3-2
1 Rear Lens Assy Block
(A-1783-536-A)
OK
OK
OK
OK
OK
NG
NG
NG
OK
NG
OK
NG
NG
END
Replacement of service
exclusive optics block
Section 1-5
OK
NG
NG
NG
Focusing Error
Amount Adjustment
(Write
⊿SB)
Section 4-8-4
Optical System
Aperture Diameter Check
Section 4-2-1
Optical Axis Check
Section 4-3-1
Projective Resolving
Power Check
Section 4-4-1
Section 4-4-1
Focus Shift
(Focal Distance) Check
Section 4-5-1
NG
Flange Back (f'F) Check
Section 4-5-1
Focusing Error
Amount Check
Amount Check
Section 4-6
Replace the spherical
aberration correcting lens
(Note)
1st Group Assy
(A-1849-455-A)
(A-1849-455-A)
(Note) Effective lens of amount of
spherical aberration
When replacing the effective lens of amount of spherical aberration,
replace in the following order.
(1) When there was defectiveness, replace the
replace in the following order.
(1) When there was defectiveness, replace the
1.
(2) If it is not improved, replace the
2.
Zoom Brush Position
Adjustment
Section 4-8-3
Lens Block Assy (Service)
(A-2076-100-A)
(A-2076-100-A)
Aperture Diameter Adjustment
Section 4-2-2
Projective Resolving
Power Adjustment
(partical Defocus Adjustment)
Section 4-4-2
Focus Shift
(Focal Distance) Adjustment
Section 4-5-2
Flange Back (f'F) Adjustment
Section 4-5-2
Electricity System
(Finished Inspection JIG )
Finished
Adjustment/Inspection
Section 4-8
Zoom Pattern Inspection
Section 4-8-3
Adjustment Parts :
(1) Rotate the 1st lens assy
(2) Replace of 1st lens assy
(1) Rotate the 1st lens assy
(2) Replace of 1st lens assy
Adjustment Parts :
Adjustment of 1st lens assy position
Adjustment of 1st lens assy position
Adjustment Parts : Back washer
1
2
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2015.10
Click on the first or last page to see other SAL18135 service manuals if exist.