Read Sony DSC-F505V (serv.man2) Service Manual online
1-3
Getting
sta
rted
11
Installing the battery pack
To remove the battery pack
Open the battery/“Memory Stick” cover. Slide the battery eject lever upward,
and remove the battery pack.
and remove the battery pack.
Be careful not to drop the battery pack when removing it.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Auto power-off function
If you do not operate the camera for about three minutes during recording, the camera
turns off automatically to prevent wearing down the battery. To use the camera again,
slide the POWER switch to turn on the camera again.
turns off automatically to prevent wearing down the battery. To use the camera again,
slide the POWER switch to turn on the camera again.
1
Open the battery/“Memory Stick” cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
2
Install the battery pack.
Insert the battery pack with the
v mark facing toward the battery compartment
as illustrated.
3
Close the battery/“Memory Stick” cover.
Battery eject lever
Battery pack
(S series)
(S series)
12
Using the AC power adaptor
Using a car battery
Use Sony DC adaptor/charger (not supplied).
1
Open the battery/“Memory Stick” cover.
2
Insert the one end of the DK-115 DC connecting cable to the
battery terminal, and close the cover.
battery terminal, and close the cover.
When inserting the cable, open the slot cover for AC power adaptor/charger and
be careful not to pinch the cable.
be careful not to pinch the cable.
3
Connect the other end of the DC connecting cable to the AC power
adaptor/charger.
adaptor/charger.
4
Connect the power cord (mains lead) to the AC power adaptor/
charger and then to a wall outlet (mains).
charger and then to a wall outlet (mains).
AC-VF10 AC power adaptor/
charger (supplied)
charger (supplied)
DK-115
DC connecting
cable (supplied)
DC connecting
cable (supplied)
Power cord (mains lead)
Slot cover for AC power
adaptor/charger
Getting
sta
rted
13
Setting the date and time
When you first use your camera, set the date and time. If these are not set, the
CLOCK SET screen appears whenever you turn on your camera for recording.
CLOCK SET screen appears whenever you turn on your camera for recording.
1
Slide the POWER switch in the direction of the arrow to turn on the
power.
power.
The POWER lamp lights up.
2
Press
v
on the control button.
The menu bar appears on the LCD screen.
3
Select [SETUP] with
B
on the control button,
then press the center
z
.
Control button
14
To cancel the date and time setting
Select [CANCEL] with
v/V/b/B on the control button, then press the center z.
4
Select [CLOCK SET] with
v
/
V
on the control button, then press the
center
z
.
5
Select the desired date display format with
v
/
V
on the control button, then press the
center
z
.
Select from [Y/M/D] (year/month/day), [M/D/Y]
(month/day/year) or [D/M/Y] (day/month/year).
(month/day/year) or [D/M/Y] (day/month/year).
6
Select the year, month, day, hour or minute
item you want to set with
item you want to set with
b
/
B
on the control
button.
The item to be set is indicated with
v/V.
7
Set the numeric value with
v
/
V
on the control button, then press
the center
z
to enter it.
After entering the number,
v/V moves to the next item.
If you selected [D/M/Y] in step
5, set the time on a 24-hour cycle.
8
Select [ENTER] with
B
on the control button,
then press the center
z
at the desired
moment to begin clock movement.
The date and time are entered.
Click on the first or last page to see other DSC-F505V (serv.man2) service manuals if exist.