XV-Z10000 (serv.man29). Chapter 2 - Connection and setup - Sharp Projector User Guide / Operation Manual. Page 7

Read Sharp XV-Z10000 (serv.man29) User Guide / Operation Manual online

Connections and Setup
-21
Connecting the Projector to a Computer
Supplied
accessory
DVI to 15-pin D-sub adaptor
Connecting to a Computer
Using the DVI to 15-pin
D-sub Adaptor and the
RGB Cable
Connect the projector to the com-
puter using the DVI to 15-pin D-sub
adaptor and the RGB cable.
Secure the connectors by tightening the
thumbscrews.
Note
See page 84  “Computer Compatibility
Chart” for a list of computer signals
compatible with the projector. Use with
computer signals other than those listed
may cause some of the functions not to
work.
When connecting the projector to a com-
puter in this way, select “A.RGB” for “Sig-
nal Type” in the “Options” menu, or select
the “A.RGB” by pressing 
 on the re-
mote control. See page 65.
A Macintosh adaptor may be required for
use with some Macintosh computers.
Contact your nearest Sharp Authorised
Projector Dealer or Service Centre.
Depending on the computer you are us-
ing, an image may not be projected un-
less the signal output setting of the com-
puter is switched to the external output.
Refer to the computer operation manual
for switching the computer signal output
settings.
To RGB output terminal
Notebook computer
RGB Cable (commercially
available)
DVI to 15-pin D-sub adaptor
Page of 16
Display

Click on the first or last page to see other XV-Z10000 (serv.man29) service manuals if exist.