Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Service Manual online
MX-7000N DRIVE SECTION Q – 5
2)
Open the front cabinet (A).
3)
Turn the blue screw (B) counterclockwise. Check that the lock
is released as shown in (C).
* Failure to complete this step may damage the primary trans-
is released as shown in (C).
* Failure to complete this step may damage the primary trans-
fer belt.
4)
Remove the screw (D). Hold the drum fixing knob (E) by the
hand to not rotate, remove the screw (F). Remove the drum
fixing knob (E).
hand to not rotate, remove the screw (F). Remove the drum
fixing knob (E).
5)
Pull out the fixing cover (G).
6)
Loosen the screws (H), and open the cover (I) of the process
section.
section.
7)
Loosen the screw (J), pull out slightly the developement unit
(BK) (K) and the OPC drum unit (BK) (L).
(BK) (K) and the OPC drum unit (BK) (L).
8)
Remove the screws (M), and open the control box (N).
A
B
C
E
D
F
G
H
H
I
J
K
L
N
N
M
M
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man68) service manuals if exist.