MX-5500N, MX-6200N, MX-7000N (serv.man206). CCE 414- CORRECTION OF FUSER OFFSET PROBLEMS MX 7000 ONLY SEE UPDATES PCU 01.05.0D - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

2/2

[Description]

No.

Subject

Description

A23

PCU version
0104D0

Change of the default
value of SIM relating to
Fusing temperature

In order to improve offset copy when the fusing roller is at low temperature, the factory default value of
fusing temperature for "Plain Paper Setting 1" has been changed.
When upgrading from the old version to the new version in the markets, it is necessary to check the
setting of Plain Paper. If "Plain Paper Setting 1" is selected, the following values need to be set up.

A24

PCU version
0105D0

Change of the default
value of SIM relating to
Fusing temperature
(MX-7000only)

In order to improve offset copy when the fusing roller is at low temperature, the factory default value of
fusing temperature for "Plain Paper Setting 2" has been changed.
When upgrading from the old version to the new version in the markets, it is necessary to check the
setting of Plain Paper. If "Plain Paper Setting 2" is selected, the following values need to be set up.