Read Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man80) Technical Bulletin online
CCE 700
Sharp Electronics (UK) Ltd., Technical Services Group
No. Subject
Description
(4) -4
Main body control-
related
related
F6-00 may occur if the main body returns from power-on mode or 1W night mode N
hours and 5 minutes (N: 0, 1, 2, 3,…) after from power-off mode or 1W night mode.
This glitch has been corrected. If this trouble code occurs in power-on mode, a
power on/off request message is displayed on the LCD of the main body. The
symptom is recovered when the power is turned off/on. If this trouble code occurs
during FAX reception in 1W night mode, the symptom is recovered when the
destination FAX is recalled.
hours and 5 minutes (N: 0, 1, 2, 3,…) after from power-off mode or 1W night mode.
This glitch has been corrected. If this trouble code occurs in power-on mode, a
power on/off request message is displayed on the LCD of the main body. The
symptom is recovered when the power is turned off/on. If this trouble code occurs
during FAX reception in 1W night mode, the symptom is recovered when the
destination FAX is recalled.
(4) -5
Main body control-
related
related
The MFP screen would go blank and the MFP would fail to recover from power save
mode if the MFP was in received fax preview mode and an attempt was made to
recover the MFP from power save mode—either by a fax being received or by the
user pressing the Power Save key—when 10 minutes or more had elapsed since
the MFP entered power save mode after receiving a fax and retaining received data.
This glitch has been corrected.
mode if the MFP was in received fax preview mode and an attempt was made to
recover the MFP from power save mode—either by a fax being received or by the
user pressing the Power Save key—when 10 minutes or more had elapsed since
the MFP entered power save mode after receiving a fax and retaining received data.
This glitch has been corrected.
(4) -6
UI-related
The one touch key displayed in Customers may disappear if the system returns
from 1W night mode when the default of the basic screen for fax/image
transmission is set to "Address Book" and another one touch key is also registered
in Customers. This glitch has been corrected.
from 1W night mode when the default of the basic screen for fax/image
transmission is set to "Address Book" and another one touch key is also registered
in Customers. This glitch has been corrected.
(4) -7
Copy-related
If a copy is made with the book document, etc., pressed from above, the lamp unit
may be caught in the upper cabinet, etc., causing the L3-00 trouble. For this
reason, a change has been made so that when the lamp unit returns, retry is
performed to prevent the L3-00 trouble from occurring.
may be caught in the upper cabinet, etc., causing the L3-00 trouble. For this
reason, a change has been made so that when the lamp unit returns, retry is
performed to prevent the L3-00 trouble from occurring.
(4) -8
Printer-related
The next job may result in a PCL XL error when it receives an invalid XL file without
job end. This glitch has been corrected.
job end. This glitch has been corrected.
(4) -9
Printer-related
Data after the EOI (End of Image) marker in JPEG data of the pasted image may not
be printed because a PCL-XL error occurs as incorrect data. This glitch has been
corrected so that data after the EOI marker is ignored.
be printed because a PCL-XL error occurs as incorrect data. This glitch has been
corrected so that data after the EOI marker is ignored.
(4) -10
Printer-related
If LPD: "banner use" is enabled in WEB page network setting, printing may stop
when the number of the jobs is close to 1,000. This glitch has been corrected.
when the number of the jobs is close to 1,000. This glitch has been corrected.
(4) -11
Printer-related
A watermark may turn into garbled because some parts of the macro processing
sections for watermark processing cannot be processed correctly. This glitch has
been corrected.
sections for watermark processing cannot be processed correctly. This glitch has
been corrected.
(4) -12
Printer-related
If the character string reference pointer is not initialized in character string
comparison for automatic discrimination of PDL data, an incorrect address may be
accessed and, in rare cases, the MFP main body may be restarted during printing.
This glitch has been corrected so that the pointer is initialized under all conditions.
comparison for automatic discrimination of PDL data, an incorrect address may be
accessed and, in rare cases, the MFP main body may be restarted during printing.
This glitch has been corrected so that the pointer is initialized under all conditions.
(4) -13
Printer-related
If an attempt is made to print large quantities of data from the USB1.1 port, a hang-
up may occur without data printed. This glitch has been corrected.
up may occur without data printed. This glitch has been corrected.
(4) -14
Printer-related
Any response may not return even if the PCL command to check Macro/Font
registrations is sent. This glitch has been corrected.
registrations is sent. This glitch has been corrected.
Click on the first or last page to see other DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man80) service manuals if exist.