AR-NC3D (serv.man17). ARNC3D-011 Setting up on an AS400 as a LAN attached printer - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Read Sharp AR-NC3D (serv.man17) Technical Bulletin online

Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 049.doc
Page:  5 of 5
22.  In the System driver program field, enter *HPPJLDRV.
23.  In the Text description field, a description for your printer configuration may be entered.
24.  For all other fields, accept the default values.
25.  Press the Enter key to create the device description.
26.  Use the Map utility, Telnet, or a Web browser to change the Port number of the ARNC3D from its
10000 default port number to 9099.  This setting will be found on the TCP/IP settings of the
ARNC3D.  Remember the default password is "sysadm".  Setting the base port number at 9099
will make the first available port on the ARNC3D, 9100
Page of 5
Display

Download Sharp AR-NC3D (serv.man17) Technical Bulletin

Found More:

AR-NC3D (serv.man17) Service Manuals

Preview DownloadPagesSize
AR-NC3D (serv.man4) ARNC1D 3D Operation Manual User Guide / Operation Manual 108 590.49 KB
AR-NC3D (serv.man26) ARNC1D 3D-001 Installation of the IP Peer-Peer Re-director on Windows 95 98 Technical Bulletin 8 1.13 MB
AR-NC3D (serv.man25) ARNC1D 3D-002 Installation of IPX Peer-Peer Re-director on Windows 95 98 Technical Bulletin 7 960.56 KB
AR-NC3D (serv.man24) ARNC1D 3D-003 Installation under Novell NetWare 4 NDS and Windows 95 98 Technical Bulletin 19 527.83 KB
AR-NC3D (serv.man23) ARNC1D 3D-004 Installation on a Windows NT4.0 Network Technical Bulletin 5 641.58 KB
AR-NC3D (serv.man22) ARNC1D 3D-005 Installation on a Windows 3.51 Network Technical Bulletin 7 218.54 KB
AR-NC3D (serv.man21) ARNC1D 3D-006 Modified Relay Connector for the ARPB2 Printer Board when fitting an ARNC3D (Only applicable to the ARNC3D) Technical Bulletin 1 9.74 KB
AR-NC3D (serv.man20) ARNC1D 3D-007 Installation under Novell NetWare 5.0 NDPS and Windows 95 98 using TCP IP Technical Bulletin 15 1.95 MB
AR-NC3D (serv.man19) ARNC1D 3D-008 Installation under Novell NetWare 3.12 and Windows 95 98 Technical Bulletin 13 2.6 MB
AR-NC3D (serv.man18) ARNC3D-010 Setting up on an AS400 using LPD LPR remote printing Technical Bulletin 4 18.49 KB
AR-NC3D (serv.man16) ARNC3D-012 Setting up the TCP IP Network Security Feature Technical Bulletin 3 184.35 KB
AR-NC3D (serv.man15) ARNC3D-013 Network printing from DOS applications in Windows NT 2000 Technical Bulletin 5 19.5 KB
AR-NC3D (serv.man14) Modified ARNC1D 3D-009 Installation on a Windows 2000 Network Technical Bulletin 18 809.1 KB
AR-NC3D (serv.man13) MAP Software Version 3.72 to remotely configure the ARNC1D 3D Network Cards Driver / Update 1.95 MB
AR-NC3D (serv.man12) IP Peer-Peer Re-director software for Windows 95 98 NT4 Version 2.7 Driver / Update 725.74 KB
AR-NC3D (serv.man11) IPX Peer-Peer Re-director software for Windows 95 98 Version 1.61 Driver / Update 812.79 KB
AR-NC3D (serv.man10) ARNC3D IPX SPX Flash Upgrade Program (Alternative to using the TCP IP version) Driver / Update 752.33 KB
AR-NC3D (serv.man9) ARNC3D Flash Memory v5.67 (Overcomes dropping off Netware Queue based networks subnetting issues). Driver / Update 560.29 KB
AR-NC3D (serv.man8) ARNC3D Flash memory v5.72d. Supports the Network Security Feature and Printing to Port 9100 for AS400 Driver / Update 563.77 KB
AR-NC3D (serv.man7) ARNC3D Flash memory v5.75a. Driver / Update 562.53 KB
AR-NC3D (serv.man6) FTP Download program version 1.50a Driver / Update 2.79 MB
AR-NC3D Instruction for upgrading the AR-NC3D firmware using the FLASHUP (IPX) utility Handy Guide 4 252.88 KB
AR-NC3D (serv.man3) ARNC3D Quick Configuration Guide Handy Guide 15 152.39 KB
AR-NC3D (serv.man2) Instructions for upgrading AR-NC3D firmware using the FTP Download Utility Handy Guide 6 238.69 KB
AR-NC3D (serv.man5) Firmware revision table (history) for AR-NC3D Ethernet Network Card. FAQ 1 10.59 KB

Random: