Read Sharp LL-193 (serv.man2) Service Manual online
LL-193A/LL-193G
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
1. CONNECTING THE MONITOR AND TURNING THE MONITOR ON AND OFF
Caution:
• When connecting, ensure that both the monitor and computer are
switched off.
• Be careful not to over bend the cable or add extension cords as this
could lead to a malfunction.
1-1. CONNECTING THE MONITOR TO A COMPUTER
■ Analog connection
Connect the supplied analog signal cable to the analog RGB output ter-
minal of the computer.
Paying attention to connector direction, firmly insert the signal cable
vertically into the connector, and then tighten the screws at both sides.
vertically into the connector, and then tighten the screws at both sides.
If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a Macin-
tosh conversion adapter (commercially available) to the analog signal cable.
Note: If connecting to the Sun Ultra series, a conversion adapter (com-
mercially available) may be required.
■ Digital connection [LL-193G]
Connect the supplied digital signal cable to the digital RGB output termi-
nal of the computer.
• The monitor has an input for connecting to a computer with a DVI-
compatible output connector (DVI-D 24 pin or DVI-I 29 pin) and
SXGA output capability. (Depending on the type of computer to be
connected, the display may not work correctly.)
• Paying attention to connector direction, firmly insert the signal cable
vertically into the connector, and then tighten the screws at both
sides.
sides.
■ Connect the supplied audio cable
When the supplied audio cable is connected to the audio output termi-
nal of the computer, the sound of the connected computer is output
from the monitor's speakers. You can also use the headphone terminal
of the monitor.
of the monitor.
Analog RGB inputterminal
(Mini D-sub 15 pin,3 rows)
Computer
Analog RGB output terminal
(Mini D-sub 15 pin, 3 rows)
Analog signal cable
(supplied)
[LL-193A]
ȪINPUT 1ȫ
Analog RGB input
(Mini D-sub 15 pin,3 rows)
Computer
Analog RGB output terminal
(Mini D-sub 15 pin, 3 rows)
Analog signal cable
(supplied)
[LL-193G]
Power Macintosh
Macintosh conversion adapter
DVI-D input terminal
(INPUT 2)
(DVI-D 24 pin)
(INPUT 2)
(DVI-D 24 pin)
Computer
Digital RGB output terminal
(DVI-D 24 pin or DVI-I 29 pin)
Digital signal cable
(supplied)
Audio input terminal
Audio output terminal
Computer
Audio cable (supplied)
Click on the first or last page to see other LL-193 (serv.man2) service manuals if exist.