Read Sharp LL-191A Service Manual online
LL-191A-W/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 7
3.
Select the check [Clerk Security File] botton at the lower right area
of the window.
of the window.
The following window is displayed
4.
Set the [MTV Type] value for MTV312M64.
5.
Push the [Load MCU file] button and chose the firemware to write in.
(Published separately is the firmware.)
(Published separately is the firmware.)
Since the following screen is displayed, click [O.K.].
6. Hold down the [MODE] + [
1
] + [
3
] buttons and press the
[POWER] button.
7. The ISP window is displayed. Set it for "GO" or "ON" using
the [
1
] button.
8. Click [RUN] on the window screen on PC.
Begun writeing.
9. When writing the firmware ends, the following window is displayed.
Caution: If the following window is displayed
it is supposed that:
1.
When an error will occur if [RUN] is pushed, additional connec-
tion of a writing board, PC, and a monitor is checked.
tion of a writing board, PC, and a monitor is checked.
2.
Lower the gauge of CPU speed on the side of the RUN button
in the window from High to about five when the error is dis-
played after writing ends.
in the window from High to about five when the error is dis-
played after writing ends.
10. If the LEDs (green and orange) come on, press the [POWER] but-
ton to turn them off.
11. [Execute All] reset.
Hold down the [MENU] + [MODE] buttons and press the [POWER] button.
12. Check the version
Hold down the [MENU] + [
3
] button and press the [POWER] button.
Either of the following notifications appears. Check the model
name, version, date and checksum.
name, version, date and checksum.
13. Turn off the AC power supply using the AC power supply switch.
ISP SLAVE Add.
= 7c
SlebeB Add.
= 4c
Command 1
= 77
inputs, and click [OK]
MODE NAME
VERSION
DATE
CHECKSUM
VERSION
DATE
CHECKSUM
V-sync
H-sync
H-sync
: 191AE
: 1.02
: 01/07/2004
: 21BA
: 1.02
: 01/07/2004
: 21BA
: 60H
㨦
: 48kHz
Click on the first or last page to see other LL-191A service manuals if exist.