Read Sharp LL-191A Service Manual online
LL-191A-W/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 6
3. HOW TO USE THE LL-191A SERIES FIRMWARE PROGRAM WRITING
*
The software program that needs to be written in the LL-191A series
is MPU, or firmware data.
is MPU, or firmware data.
[Applicable models]
LL-191A-B, LL-191A-W
[System requirements for the tool]
Windows98
[Use machine parts]
• PC (USB, Print port necessity)
• Writing board (X1049MP-27) (QKITX1049MPZZ)
• RGB cable (QCNW-1041MPZZ)
• USB cable (QCNW-1027MPZZ)
Cables are available in the commercial item.
[INSTALLATION METHOD]
1.
Get firmware writing [Setup.zip].
2.
Double click [setup.zip], and expand
3.
Double click [Setup.zip]
Installation is begun.
4.
Following Daiagboccs is displayed,and [NEXT] is pushed.
5.
Specified folder at the installation destination, and click [NEXT].
(When the installation destination is changed, the folder is specified
with [Change...]. )
with [Change...]. )
6.
Performed is installation and installation is performed in several seconds.
The following window is displayed.
7. Click [finish]
Installation is end above.
[Firmware program writing procedure]
1. Click [Select Chip].
2. Selects the start button in program
3
SHARP
3
ISP the order.
The following window is displayed
Caution: The following messages appear when reactivating after the
installation. Click [OK].
Click on the first or last page to see other LL-191A service manuals if exist.