Read Sharp R-4E54M (serv.man12) Technical Bulletin online
Sharp Electronics (UK) Limited
Originator AvW Supervisor Approval Date / / Reference TB9303104
Revision
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
R4E54-002
Month of Issue:
Classification: Routine
MICROWAVE TECHNICAL BULLETIN
Page 1 of 1
MODELS
R4E54M
R4G54M
REASON
The base plate has been changed to incorporate the turntable motor cover.
ACTION
When replacing the turntable motor to units fitted with the new base plate, use the
procedure outlined below.
procedure outlined below.
1. Disconnect the oven from the supply.
2. Remove the motor cover by snipping off the material in the cormers.
2. Remove the motor cover by snipping off the material in the cormers.
IMPORTANT
When the corners have been snipped off, bend the corner areas flat. No sharp
edges must be evident after removal of the motor cover.
When the corners have been snipped off, bend the corner areas flat. No sharp
edges must be evident after removal of the motor cover.
3. Disconnect the wires from the turntable motor.
4. Remove the two screws retaining the turntable motor.
5. The motor is now free.
6. After replacement, use the one screw allocated to fit the turntable motor cover
4. Remove the two screws retaining the turntable motor.
5. The motor is now free.
6. After replacement, use the one screw allocated to fit the turntable motor cover
back in place.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
2-4
Base Plate, New
GDAI-A219WRPO
AS
Display