Read Panasonic KX-CL500 / KX-CL510 (serv.man4) Service Manual Supplement online
(5) Remove the CMY home lever, PC home spring and PC
home lever.
(6) Remove the screw and OPC cam home position sensor
board.
(7) Remove the 4 E-rings, 4 OPC Gears and 4 DEV. gear
assemblies.
Caution :
When exchanging the OPC Gear, the 4 OPC Gears must
be exchanged with new 4 gears with the same molding
number at the same time, or the poor printed quality
may be caused. Regarding to the molding number, the
molding number has been marked on the OPC Gear as
shown below ( Figure-2).
be exchanged with new 4 gears with the same molding
number at the same time, or the poor printed quality
may be caused. Regarding to the molding number, the
molding number has been marked on the OPC Gear as
shown below ( Figure-2).
(8) Remove the fuser idle gear ( 1 E-ring ).
5
KX-CL500 / KX-CL510
Click on the first or last page to see other KX-CL500 / KX-CL510 (serv.man4) service manuals if exist.