Read Panasonic DP-2310 / DP-3010 / DP-2330 / DP-3030 Other Service Manuals online
Digital Imaging Systems
DP-2310/3010
DP-2330/3030
DP-2330/3030
[ Version. 2.1 ]
This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
WARNING
2
The contents of this Parts Manual are subject to change without notice.
Published in Japan.
Published in Japan.
General Annotations
1. Panasonic Digital Document Company and other Panasonic Sales Companies reserve
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.
3.
Important Safety Notice
Components identified by a mark, have special characteristics important for safety.
When replacing any of these components, use only manufacturer’s specified parts.
When replacing any of these components, use only manufacturer’s specified parts.
4. In New Parts column, "N" indicates part is used only in DP-2330/3030 models (Except PU,
PUR), "C" indicates part is used in previous models.
PUR), "C" indicates part is used in previous models.
5. In Remarks column, "PM" indicates “Preventive Maintenance Part".
6. In Remarks column, "RTL" indicates that the Retention Time is limited for this item. After
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependant on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependant on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
7. This “Unit" which includes other itemized parts is provided as “Limited Availability" for your
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
8. This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a mark following
the PCB part numbers in a label on the PCB.
the PCB part numbers in a label on the PCB.
Caution:
Pb free solder has a higher melting point than standard solder; typically the melting
point is 50 - 70 F (30 - 40 C) higher. Please use a soldering iron with temperature
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
Pb free solder will tend to splash when heated too high (about 1100 F/600 C).
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL: http://www.senju-m.co.jp) is recommended when repairing PbF PCBs.
Table of Contents
3
Destination Codes ..................................... 5
Control Panel Unit...................................... 6
Scanner Unit ............................................ 12
Electrical Parts......................................... 16
Frame Parts ............................................. 22
Cover Assembly....................................... 26
Process Unit (1/3) .................................... 30
Process Unit (2/3) .................................... 34
Process Unit (3/3) .................................... 38
Drive Unit ................................................. 42
Fuser Unit ................................................ 46
Paper Feed Module ................................. 52
Paper Transportation ............................... 56
Paper Transport Unit ............................... 64
Automatic Duplex Unit ............................. 68
Dual-Path Exit Guide Unit........................ 70
Inverting ADF (1/3) .................................. 74
Inverting ADF (2/3) .................................. 78
Inverting ADF (3/3) .................................. 82
PC Boards / Harnesses ........................... 86
Paper Tray ............................................... 96
Packing and Accessories ........................ 98
ADF Packing and Accessories .............. 104
2nd/4th Paper Feed Module .................. 106
3rd Paper Feed Module ......................... 110
Finisher (1/6).......................................... 114
Finisher (2/6) ......................................... 116
Finisher (3/6) ......................................... 118
Finisher (4/6) ......................................... 120
Finisher (5/6) ......................................... 124
Finisher (6/6) ......................................... 128
ADF (1/3) ............................................... 130
ADF (2/3) ............................................... 134
ADF (3/3) ............................................... 138
Printer Controller Module for PCL6 ....... 142
Network Scanner Module ...................... 144
Internet Fax / E-Mail Module ................. 146
Fax Communication Board .................... 148
Hard Disk Drive Unit .............................. 152
Accounting Software.............................. 154
DD Server Software............................... 156
1-Bin Finisher Packing and
Accessories ........................................... 158
Accessories ........................................... 158
Printer Controller Module
for PS / PCL6......................................... 160
for PS / PCL6......................................... 160
Hardware Identification Template.......... 162
4
memo