Read Panasonic TH-37PR10U / TH-42PR10U Service Manual online
6 Disassembly TH-37PR10U
·
To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
off for discharge from electrolysis capacitors.
·
and
marks indicate screw positions.
6.1. Removal of Rear Cover
1. Remove screws (×6
, ×6
, ×14
, ×8
) and then
remove the Rear Cover.
6.2. Removal of Slot Block
1. Disconnect the connectors (DS1, DS4, DS6, DS7).
2. Remove 4 screws and then remove the Slot Block.
3. Disconnect the connectors(DS2, DS8, DS15).
2. Remove 4 screws and then remove the Slot Block.
3. Disconnect the connectors(DS2, DS8, DS15).
6.3. Removal of DS-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connector(DS14).
3. The Slot Block is turned inside out.
4. Remove 6 screws and then remove the Slot Cover.
4. Remove 6 screws and then remove the Slot Cover.
5. Remove 6 screws and then remove DS-Board.
9
TH-37PR10U / TH-42PR10U
Click on the first or last page to see other TH-37PR10U / TH-42PR10U service manuals if exist.