Read Panasonic DMC-F7PP / DMC-F7E / DMC-F7E1 / DMC-F7B / DMC-F7B1 / DMC-F7A / DMC-F7EN Service Manual online
7 SERVICE NOTES
7.1. WHEN REPLACING THE MAIN C.B.A.
After replacing the MAIN C.B.A. be sure to write the data in Flash ROM with TATSUJIN KIT in accordance with the instruction given
by TATSUJIN KIT.
by TATSUJIN KIT.
(There are two kinds of the Flash ROM data, one is NTSC version and the other one is PAL version.)
Then, adjust and/or confirm that each adjustment value or performance to be within specification.
7.2. SERVICE POSITION
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
VFK1575C3320
CN3 (MAIN) - CN301(MONITOR)
33PIN 0.3 ZZ
2
VFK1175
CN4 (MAIN) - CN201 (JACK)
16PIN 0.3 FFC
3
VFK0977
CN1 (MAIN) - CCD
20PIN 0.5 FFC
4
VFK1480
CN5 (MAIN) - CN401(TOP OPERATION)
6PIN 0.5 FFC
5
VFK1576DSC02
CN6 (MAIN) - COVER SW.
CABLE
6
VFK1582A7025
CN2 (MAIN) - CN102 (REGULATOR)
70PIN 0.5 B to B
7
VFK1582A2125
CN101 (REGURATOR) - LENS UNIT
21PIN 0.5 FFC
Fig. S2 Service Position
CAUTION-1. (When servicing Regulator C.B.A. / STROBE UNIT)
1. Be sure to discharge the capacitor on Regulator C.B.A. before disassembling the Regulator C.B.A.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON REGULATOR C.B.A.”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on Regulator C.B.A. when setting.
3. DO NOT allow other parts to touch the high voltage circuit on Regulator C.B.A.
9
DMC-F7PP / DMC-F7E / DMC-F7E1 / DMC-F7B / DMC-F7B1 / DMC-F7A / DMC-F7EN
Click on the first or last page to see other DMC-F7PP / DMC-F7E / DMC-F7E1 / DMC-F7B / DMC-F7B1 / DMC-F7A / DMC-F7EN service manuals if exist.