Read Harman Kardon AVAP1G (serv.man7) User Guide / Operation Manual online
Main In
When a separate pre-amplifier is
connected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.
NOTE: When you do not use the PRE
OUT and MAIN IN separately, always
connect the PRE OUT and MAIN IN
jacks with the jumper plugs.
When a separate pre-amplifier is
connected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.
NOTE: When you do not use the PRE
OUT and MAIN IN separately, always
connect the PRE OUT and MAIN IN
jacks with the jumper plugs.
14. SUBWOOFER
OUTPUT JACKS
OUTPUT JACKS
Connect a powered subwoofer to these
jacks. This output may also be used
for any external component requiring
a full range volume level input.
jacks. This output may also be used
for any external component requiring
a full range volume level input.
15. SPEAKER TERMINALS
Connect the front left (L) and right (R)
speakers to the corresponding
terminals. Make sure that the positive
(+ or red) and negative (- or black)
terminals on the speakers are
connected to the corresponding
terminals on the receiver.
speakers to the corresponding
terminals. Make sure that the positive
(+ or red) and negative (- or black)
terminals on the speakers are
connected to the corresponding
terminals on the receiver.
16. CENTER/REAR
SPEAKER TERMINALS
SPEAKER TERMINALS
Connect the center and rear speakers
to the corresponding terminals. Make
sure that the positive (+ or red) and
negative (- or black) terminals on the
speakers are connected to the corre-
sponding terminals on the receiver.
When you connect the rear speakers,
connect both L and R speakers.
PLEASE NOTE: Sound will not be
provided through the rear speakers
unless both speakers are connected.
to the corresponding terminals. Make
sure that the positive (+ or red) and
negative (- or black) terminals on the
speakers are connected to the corre-
sponding terminals on the receiver.
When you connect the rear speakers,
connect both L and R speakers.
PLEASE NOTE: Sound will not be
provided through the rear speakers
unless both speakers are connected.
17. AC INPUT CORD
Plug this cord in AC outlet on a wall.
18. AC SWITCHED OUTLET
These outlets provides AC power. The
AC power is switched by the power
button of this receiver. Use this outlet
for a CD player or a cassette deck.
AC power is switched by the power
button of this receiver. Use this outlet
for a CD player or a cassette deck.
7
ENGLISH
AVR10 engelsk 11/01/98 10:10 Side 7
Click on the first or last page to see other AVAP1G (serv.man7) service manuals if exist.