Read Harman Kardon ADP 303 (serv.man3) User Guide / Operation Manual online
5
Rear Panel Connections
¡ AC-3 RF IN Jack
Connect the AC-3 RF Output jack of
a compatible Laser Disc player
here.
a compatible Laser Disc player
here.
™ AC-3 Digital IN - Coax Jack
These terminals are for connection
to the coax data AC-3 output of
future AC-3 digital products such as
DVD, DSS and HDTV.
to the coax data AC-3 output of
future AC-3 digital products such as
DVD, DSS and HDTV.
£ AC-3 Digital IN - Optical
Jack
These terminals are for connection
to the optical data AC-3 output of
future AC-3 digital products such as
DVD, DSS and HDTV. To avoid dust
contamination, leave the protective
cap inserted unless the jack is in
use.
These terminals are for connection
to the optical data AC-3 output of
future AC-3 digital products such as
DVD, DSS and HDTV. To avoid dust
contamination, leave the protective
cap inserted unless the jack is in
use.
IMPORTANT NOTE: These input
jacks are for AC-3 digital signals
only. Do not connect standard audio
outputs or the PCM digital output of
an LV or CD player to these AC-3
Input Jacks.
jacks are for AC-3 digital signals
only. Do not connect standard audio
outputs or the PCM digital output of
an LV or CD player to these AC-3
Input Jacks.
¢ 6 Channel Input Jacks
When the ADP303 is used with an
external preamplifier, an outboard
surround processor or any AV
receiver with PREAMP-OUT/MAIN-
INPUT jacks, connect these jacks
to the outputs of the preamp or
processor.
external preamplifier, an outboard
surround processor or any AV
receiver with PREAMP-OUT/MAIN-
INPUT jacks, connect these jacks
to the outputs of the preamp or
processor.
∞ 6 Channel Output Jacks
These jacks deliver the outputs of
the AC-3 decoder or pass through
the inputs from a preamplifier/
processor (see item 4) when the
ADP303 is in the BYPASS mode.
Depending on your application, they
will either be connected to the “6
Channel Direct” inputs of products
such as the AVR80 or directly to
external power amplifiers .
the AC-3 decoder or pass through
the inputs from a preamplifier/
processor (see item 4) when the
ADP303 is in the BYPASS mode.
Depending on your application, they
will either be connected to the “6
Channel Direct” inputs of products
such as the AVR80 or directly to
external power amplifiers .
§ Front SPK Switch
This switch determines if low
frequency signals are sent to the
front left/right speakers. The factory
default “Small” sends them to the
subwoofer output only, while “Large”
sends a full range signal to the front
left/right speakers.
frequency signals are sent to the
front left/right speakers. The factory
default “Small” sends them to the
subwoofer output only, while “Large”
sends a full range signal to the front
left/right speakers.
¶ Surr SPK Switch
This switch determines if low
frequency signals are sent to the
surround speakers. The factory
default, “Small,” sends them to the
subwoofer output only, while “Large”
sends a full range signal to the
surround speakers. Select “none” if
you will not use surround speakers
and to route surround audio to the
front left/right speakers.
frequency signals are sent to the
surround speakers. The factory
default, “Small,” sends them to the
subwoofer output only, while “Large”
sends a full range signal to the
surround speakers. Select “none” if
you will not use surround speakers
and to route surround audio to the
front left/right speakers.
• Center SPK Switch
This switch determines if low
frequency signals are sent to the
center speaker. The factory default ,
“Small,” sends them to the
subwoofer output only, while “Large”
send a full range signal to the center
speaker. Select “none” if you will not
use a center speaker and to route
center channel audio to the front
left/right speakers.
frequency signals are sent to the
center speaker. The factory default ,
“Small,” sends them to the
subwoofer output only, while “Large”
send a full range signal to the center
speaker. Select “none” if you will not
use a center speaker and to route
center channel audio to the front
left/right speakers.
ª Subwoofer switch
This switch, in conjunction with the
other “SPK” switches, directs the
output of low frequency (LFE)
signals. If a subwoofer is used,
select “ON” to send all system
sound below 100 Hz to the
subwoofer output. If the “OFF”
position is used, the LFE output will
be directed to either the front
left/right or center speaker outputs,
depending on the position of
switches
other “SPK” switches, directs the
output of low frequency (LFE)
signals. If a subwoofer is used,
select “ON” to send all system
sound below 100 Hz to the
subwoofer output. If the “OFF”
position is used, the LFE output will
be directed to either the front
left/right or center speaker outputs,
depending on the position of
switches
§ and •.
Caution: When you want to change
settings of any ot these switches,
settings of any ot these switches,
§¶•ª you must turn the power
switch off and back on in order to
effect the changes you want.
effect the changes you want.
‚ AC Outlet (Unswitched)
This unswitched outlet will supply
power to any device in your system
as long as the ADP303 is connected
to AC power, even when the
ADP303’s power switch is in the off
position.
power to any device in your system
as long as the ADP303 is connected
to AC power, even when the
ADP303’s power switch is in the off
position.
The maximum power this outlet can
supply is 200 watts.
supply is 200 watts.
⁄ Power cable
Connect the power cable to an
unswitched AC power outlet. Plug
into a household AC power outlet.
unswitched AC power outlet. Plug
into a household AC power outlet.
L R
SURROUND
SUB
WOOFER
CENTER
L R
AC-3
DIGITAL IN
OPT
MODEL NO.: ADP303
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, USA
MADE IN JAPAN
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, USA
MADE IN JAPAN
AC-3
DIGITAL IN
COAX
AC-3
RF IN
RF IN
FRONT SPK.
LARGE
SMALL
SURR. SPK.
CENTER SPK
SUB. W SPK
IN
OUT
AC OUTLET
UNSWITCHED
LARGE
NON
SMALL LARGE
NON
SMALL
OFF
ON
¡
™ £
¢ ∞
§ ¶ • ª
‚
⁄
24093_ADP 303 Eng. 27/02/1998 10:34 Side 6
Click on the first or last page to see other ADP 303 (serv.man3) service manuals if exist.