Read Sony SLV-SE35EG / SLV-SE50EE / SLV-SE50EG / SLV-SE60AE1 / SLV-SE60AE2 / SLV-SE60NP / SLV-SE70B / SLV-SE70EE / SLV-SE70EG / SLV-SE70EN / SLV-SE70EX / SLV-SE70NP1 / SLV-SE70NP2 / SLV-SE70UX / SLV-SE70VC1 / SLV-SE70VC2 / SLV-SE80B / SLV-SE80EG / SLV-SE80EN / SLV- Service Manual online
1-12
Additional Operations
48
Shuttle ring
JOG
Playing/searching
at various speeds
at various speeds
Playback options
View the picture during
fast-forward or rewind
fast-forward or rewind
Play at high speed
×
2
&
SLOW
)
FF
·
PLAY
Operation
During fast-forward, hold down )# FF/) FF. During
rewind, hold down 03 REW/0 REW.
rewind, hold down 03 REW/0 REW.
• During playback, press )# FF or 03 REW on the remote
commander.
• During playback, hold down )# FF/) FF or 03 REW/
0
REW. When you release the button, normal playback
resumes.
0
REW
)#
FF
03
REW
Additional Operations
1
2
3
4
5
6
7
8
9
0
49
Additional Operations
To resume normal playback
Press ·
PLAY.
Playback options
Play at twice the normal
speed
speed
Play in slow motion
Play frame by frame
Rewind and start play
Operation
During playback, press
×
2.
During playback, press & SLOW.
During pause, press )# FF or 03 REW on the remote
commander. Hold down )# FF or 03 REW to play one
frame each second.
commander. Hold down )# FF or 03 REW to play one
frame each second.
During stop, press ·
PLAY on the VCR while holding
down 0 REW on the VCR.
down 0 REW on the VCR.
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.
are two ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise.
Each change in the shuttle ring position changes the playback mode in the
following way.
Each change in the shuttle ring position changes the playback mode in the
following way.
Pause
Slow motion
in reverse
in reverse
Normal speed
in reverse
in reverse
Double speed
in reverse
in reverse
High speed in
reverse
reverse
Slow motion
Normal speed
(Initial speed)
(Initial speed)
Double speed
High speed
continued
Additional Operations
50
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button goes off.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
Playing/searching at various speeds (continued)
51
Additional Operations
Recording TV
programmes
using Dial Timer
programmes
using Dial Timer
The Dial Timer function allows you to make timer recordings of
programmes without turning on your TV. Set the recording timer to
record up to eight programmes that will be broadcast within the next 24
hours using DIAL TIMER. The recording start time and stop time can
be set at 15 minutes intervals.
programmes without turning on your TV. Set the recording timer to
record up to eight programmes that will be broadcast within the next 24
hours using DIAL TIMER. The recording start time and stop time can
be set at 15 minutes intervals.
Before you start…
• Check that the VCR clock is set to the correct time.
• Insert a tape with its safety tab in place. Make sure the tape is longer
• Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
DIAL TIMER
1
Press DIAL TIMER.
“START” and the recording start time appear alternately in the display
window.
window.
2
Turn DIAL TIMER to set the recording start time.
The time changes in 15 minute intervals.
VIDEO
SP
OPC
VIDEO
SP
OPC
VIDEO
SP
OPC
continued
Click on the first or last page to see other SLV-SE35EG / SLV-SE50EE / SLV-SE50EG / SLV-SE60AE1 / SLV-SE60AE2 / SLV-SE60NP / SLV-SE70B / SLV-SE70EE / SLV-SE70EG / SLV-SE70EN / SLV-SE70EX / SLV-SE70NP1 / SLV-SE70NP2 / SLV-SE70UX / SLV-SE70VC1 / SLV-SE70VC2 / SLV-SE80B / SLV-SE80EG / SLV-SE80EN / SLV- service manuals if exist.