SLV-KS1 - Sony VCR Service Manual (repair manual). Page 6

1

Using the supplied audio/video cable, connect one of the yellow plugs to VIDEO of LINE OUT on
this VCR, and the other yellow plug to VIDEO of LINE IN on your TV.

2

Connect both of the red and white plugs, in any order, to the black AUDIO LINE OUT jacks on this
VCR, and the other ends to the AUDIO LINE IN jacks on your TV. If your TV is monaural (only one
AUDIO LINE IN jack), you only need to use one of the red or white plugs. Just be sure to connect
the same color plug to both the VCR and your TV.

3

Plug in the power cord to an AC outlet.

• If your TV only has an RF jack (antenna jack), you need to use an RF modulator (not supplied) to connect this VCR.

Refer to your modulator’s instruction manual for further details.

When you want to use this VCR to make a recording, connect
LINE IN on this VCR to LINE OUT of your other video source
(such as a video camera, TV, or another video deck) using an
audio/video cable (not supplied). If your other video source
has a stereo LINE OUT (three jacks), use the audio/video
cable VMC-910MS (sold separately). Play the original tape on
the other video source and use this VCR to make the
recording. See “  Recording and Tape Speed Buttons” on the reverse for more information.

• If you connect your TV’s LINE OUT jacks to the LINE IN jacks, be sure to disconnect the VCR’s LINE OUT jacks

from your TV’s LINE IN jacks.

Follow the steps below to connect your TV to the VCR.

1

3

2

2

1