Read Sony SLV-ED225PS / SLV-ED323ME / SLV-ED323SG / SLV-ED825PS / SLV-ED828ME / SLV-ED828SG / SLV-ED925PS / SLV-ED929MI / SLV-EZ121AZ / SLV-EZ424AZ / SLV-EZ725AZ / SLV-EZ727AZ Service Manual online
5-5
Fig. 5-5 Location of Test point (Main PCB-Top View)
AUDIO OUTPUT
HEAD SWITCHING
ENVELOPE
Test point :
TP602 (H’D S/W -Trigger)
TP301 (Envelope)
TP302 (Audio output)
5-2 MECHANICAL ADJUSTMENT
Note : Refer to the Mechanical Manual for the adjustment and confirmation of ass’y deck.
5-2-1 The number and position of test point
5-2-2 ACE Head Position (X-Point) Adjustment
(See the 5-2-1(d) ACE Head Position (X-Point) Adjustment on
page 5-2 of the Mechanical Manual)
page 5-2 of the Mechanical Manual)
1) Playback the alignment tape (Color bar).
2) Press the “TEST” button on Main PCB/Function PCB to set
2) Press the “TEST” button on Main PCB/Function PCB to set
the adjustment mode.
(See Fig. 5-2, 5-3 and 5-4)
3) Press the “5” button of remote control then adjustment is op-
3) Press the “5” button of remote control then adjustment is op-
erated automatically. (See Fig. 5-1)
4) Connect the CH-1 probe to TP301 (Envelope) the CH-2
probe to TP602 (H’D switching pulse) and then trigger
to CH-1.
to CH-1.
5) Insert the (-) driver into the X-Point adjustment hole
and adjust it so that envelope waveform is maximum.
6) Turn the Power off.
Click on the first or last page to see other SLV-ED225PS / SLV-ED323ME / SLV-ED323SG / SLV-ED825PS / SLV-ED828ME / SLV-ED828SG / SLV-ED925PS / SLV-ED929MI / SLV-EZ121AZ / SLV-EZ424AZ / SLV-EZ725AZ / SLV-EZ727AZ service manuals if exist.