SLV-ED1PL, SLV-ED4KR, SLV-ED4PL, SLV-ED7KR, SLV-ED8PL - Sony VCR Service Manual (repair manual)

slv-ed1pl, slv-ed4kr, slv-ed4pl, slv-ed7kr, slv-ed8pl service manual
Model
SLV-ED1PL SLV-ED4KR SLV-ED4PL SLV-ED7KR SLV-ED8PL
Pages
80
Size
16.3 MB
Type
PDF
Document
Service Manual
Brand
Device
VCR
File
slv-ed1pl-slv-ed4kr-slv-ed4pl-slv-ed7kr-slv-ed8pl.pdf
Date

Read Sony SLV-ED1PL / SLV-ED4KR / SLV-ED4PL / SLV-ED7KR / SLV-ED8PL Service Manual online

MICROFILM
SERVICE MANUAL
Korean Model
SLV-ED7KR
Philippine Model
SLV-ED1PL/ED4PL/ED8PL
RMT-V247B/V248
VIDEO CASSETTE RECORDER
SLV-ED1PL/ED4PL/ED7KR/ED8PL
G
• Refer to the SERVICE MANUAL of VHS MECHANICAL
ADJUSTMENTS 
VI
 for MECHANICAL ADJUSTMENTS.
(9-921-647-11)
* The abbreviations of ED1, ED4, ED7 and ED8 contained in this service manual
are indicated when these models are common to all their corresponding mod-
els as given below.
Photo: SLV-ED1PL
S  MECHANISM
ED1PL
ED1
Abbreviated
model name
All model
names
SLV-
ED4PL
ED4
ED7KR
ED7
ED8PL
ED8
SPECIFICATIONS
– Continued on next page –
Inputs and outputs
LINE-1 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (1) (ED1/ED4)
AUDIO IN, phono jack (2) (ED7/ED8)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-2 IN (ED7/ED8)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (2)
Input level: 327mVrms
Input impedane: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbal-
anced, sync negative
AUDIO OUT, phono jack (1) (ED1/ED4)
AUDIO OUT, phono jack (2) (ED7/ED8)
Standard output: 327 mVrms
Load impedance; 47 kilohms
Output impedance: less than 10 kilohms
Timer section
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
8 programs per month (max.)
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 1 hour at a time
General
Power requirements
110 – 240 V AC, 50/60 Hz
Power consumption
19W (ED1/ED4)
22W (ED7/ED8)
Operating temperature
5 ˚C to 40 ˚C
Storage temperature
–20 ˚C to 60 ˚C
System
Format
VHS NTSC standard
Video recording system
Rotary head helical scanning FM system
Video heads
Double azimuth two heads
Video signal
NTSC color, EIA standards
Tape speed
SP: 33.35 mm/s
EP: 11.11 mm/s
LP: 16.67 mm/s, playback only
Maximum recording
playback time
8 hrs. in EP mode (with T-160 tape)
Fast-forward and rewind time
Approx. 3 min. (with T-120 tape)
Tuner section
Channel coverage
VHF 2 to 13
UHF 14 to 69
CATV A-8 to A-1, A to W, W
+
1 to W
+
84
Antenna
75-ohm antenna terminal for VHF/UHF
Ver 1.0  1998. 08
– 2 –
SAFETY CHECK-OUT
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections.  Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transis-
tors, that were installed during a previous repair.  Point them
out to the customer and recommend their replacement.
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
4. Look for parts which, though functioning, show obvious signs
of deterioration.  Point them out to the customer and recom-
mend their replacement.
5. Check the B+ voltage to see it is at the values specified.
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
!
  OR  DOTTED
LINE  WITH  MARK  
!
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
• Feature Difference
SLV-
ED1PL
ED4PL
ED7KR
ED8PL
FEATURE
HEAD/CH
2/2
4/4
4/6
4/6
RCA REAR LINE IN/OUT
®
/
®
®
/
®
®
(3P)/
®
(3P)
®
(3P)/
®
(3P)
RCA FRONT LINE IN
G
G
®
(3P)
®
(3P)
CLICK SHUTTLE
G
G
G
®
REMOTE COMMANDER RMT-
V248
V248
V247B
V247B
Dimensions
Approx. 355 
×
 96 
×
 285 mm (w/h/d): (ED1)
Approx. 430 
×
 100 
×
 286 mm (w/h/d):
(ED4/ED7/ED8)
including projecting parts and controls
Mass
Approx. 3.7 kg: (ED1)
Approx. 4.2 kg: (ED4/ED7/ED8)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
75-ohm coaxial cable with F-type connectors (1)
Plug adaptor (1) (ED1/ED4/ED8)
Design and specifications are subject to change
without notice.
– 3 –
TABLE  OF  CONTENTS
Section
Title
Page
Section
Title
Page
Feature Difference ................................................................... 2
SERVICE NOTE ...................................................................... 4
1.
GENERAL
Getting Started .............................................................. 1-1
Basic Operations ........................................................... 1-4
Additional Operations .................................................... 1-7
Additional Information ................................................... 1-9
2.
DISASSEMBLY
2-1.
Upper Case Removal .................................................... 2-1
2-2.
NK-11 Board Removal .................................................. 2-1
2-3.
Rear Panel Removal ..................................................... 2-1
2-4.
Front Panel Section Removal ....................................... 2-1
2-5.
Power Block Removal ................................................... 2-2
2-6.
Mechanism Deck Removal ........................................... 2-2
2-7.
MA-323 Board Removal ................................................ 2-2
2-8.
Internal Views ................................................................ 2-3
2-9.
Circuit Boards Location ................................................. 2-4
3.
BLOCK  DIAGRAMS
3-1.
Overall Block Diagram .................................................. 3-1
3-2.
Video1 Block Diagram ................................................... 3-4
3-3.
Video2 Block Diagram ................................................... 3-5
3-4.
Servo/System Control Block Diagram .......................... 3-7
3-5.
Audio Block Diagram ..................................................... 3-9
3-6.
Tuner Block Diagram ..................................................... 3-11
3-7.
Mode Control Block Diagram ........................................ 3-13
3-8.
Power Block Diagram .................................................... 3-15
4.
PRINTED  WIRING  BOARDS  AND
SCHEMATIC  DIAGRAMS
4-1.
Frame Schematic Diagram ............................................ 4-3
4-2.
Printed Wiring Boards and Schematic Diagrams ......... 4-5
MA-323 (Head Amp) Schematic Diagram .................... 4-5
MA-323 Printed Wiring Board ....................................... 4-9
MA-323 (Video, Audio) Schematic Diagram ................. 4-11
MA-323 (System Control) Schematic Diagram ............ 4-15
MA-323 (Servo Control) Schematic Diagram ............... 4-17
MA-323 (Hi-Fi Audio) Schematic Diagram .................... 4-19
MA-323 (IO) Schematic Diagram .................................. 4-21
MA-323 (Tuner) Schematic Diagram ............................ 4-23
MA-323 (Mode Control) Schematic Diagram ................ 4-25
MA-323 (FL Driver) Schematic Diagram ....................... 4-27
MA-323 (Power Supply) Schematic Diagram ............... 4-29
DS-80 Printed wiring Board and
Schematic Diagram ....................................................... 4-31
NK-11 Printed wiring Board and
Schematic Diagram ....................................................... 4-33
DM-76, MF-312
Printed Wiring Board and Schematic Diagram ............. 4-35
HS-921SF/921SF1 Printed Wiring Board ..................... 4-37
HS-921SF/921SF1 Schematic Diagram ....................... 4-39
SR-708 Printed Wiring Board ........................................ 4-41
SR-708 Schematic Diagram ......................................... 4-43
5.
INTERFACE,  IC  PIN  FUNCTION  DESCRIPTION
5-1.
System Control-Video Block Interface
(MA-323 board IC161) .................................................. 5-1
5-2.
System Control-Servo Peripheral Circuit Interface
(MA-323 board IC161) .................................................. 5-1
5-3.
System Control-Mechanism Block Interface
(MA-323 board IC161) .................................................. 5-2
5-4.
System Control-Audio Block Interface
(MA-323 board IC161) .................................................. 5-3
5-5.
Servo/System/Tuner/Timer Control Microprocessor
Pin Function (MA-323 board IC161) ............................. 5-4
5-6.
Korean Stereo Processor Pin Function
(NK-11 board IC1) ......................................................... 5-5
6.
ERROR  CODES
....................................................... 6-1
7.
ADJUSTMENTS
7-1.
Mechanical Adjustments ............................................... 7-1
7-2.
Electrical Adjustments ................................................... 7-1
2-1.
Pre-Adjustment Preparations ........................................ 7-1
2-1-1. Instruments to be Used ............................................ 7-1
2-1-2. Connection ............................................................... 7-1
2-1-3. Set-up of Adjustment ................................................ 7-1
2-1-4. Alignment Tape ......................................................... 7-1
2-1-5. Specified I/O Level and Impedance ......................... 7-1
2-1-6. Adjusting Sequence ................................................. 7-2
2-2.
Power Supply Adjustment ............................................. 7-2
2-2-1. Power Supply Check ................................................ 7-2
2-2-2. +6V Adjustment ........................................................ 7-2
2-3.
Servo System Adjustment ............................................. 7-2
2-3-1. Switching Position Adjustment ................................. 7-2
2-4.
Audio System Adjustments ........................................... 7-3
2-4-1. Hi-Fi Audio System Adjustment ............................... 7-3
1.
AF Switching Position Adjustment ........................... 7-3
2.
Frequency Response Check .................................... 7-3
3.
Overall Level Characteristic and
Distortion Factor Check ........................................... 7-4
4.
Overall S/N Check .................................................... 7-4
2-4-2. Normal Audio System Adjustment ........................... 7-4
1.
ACE Head Adjustment ............................................. 7-4
2.
E-E Output Level Check .......................................... 7-4
3.
Frequency Responce Check .................................... 7-4
4.
Overall Level Characteristic and Distortion
Factor Check ............................................................ 7-5
5.
Overall S/N Check .................................................... 7-5
2-5.
Tuner System Adjustment ............................................. 7-5
2-5-1. Separation Adjustment ............................................. 7-5
2-6.
Parts Arrangement Diagram for Adjustments ............... 7-6
8.
REPAIR  PARTS  LIST
8-1.
Exploded Views ............................................................. 8-1
8-1-1. Front Panel and Cabinet Assemblies  (ED1) ........... 8-1
8-1-2. Chassis Assembly (ED1) ......................................... 8-2
8-1-3. Front panel and Cabinet Assemblies
(ED4/ED7/ED8) ........................................................ 8-3
8-1-4. Chassis Assembly (ED4/ED7/EZ8) ......................... 8-4
8-1-5. Mechanism Chassis Assembly (1) ........................... 8-5
8-1-6. Mechanism Chassis Assembly (2) ........................... 8-6
8-1-7. Mechanism Chassis Assembly (3) ........................... 8-7
8-2.
Electrical Parts List ....................................................... 8-8
– 4 –
SERVICE  NOTE
1. DISASSEMBLY
• This set can be disassembled in the order shown below.
Note:
Pages in          indicated pages in the SERVICE MANUAL.
Pages in          indicated pages in the VHS MECHANICAL ADJUSTMENT MANUAL VI.
NK-11Board 
(ED7)
(Page 2-1)
Set
Upper case
(Page 2-1)
Front Panel
Section
(Page 2-1)
Power 
Block
(Page 2-2)
Pinch Press
Block Ass’y
(Page 14)
Ground Shaft
Ass’y
(Page 13)
Mechanism
Deck
(Page 2-2)
FL Complete
 Ass’y
(Page 13)
Drum
Ass’y
(Page 13)
Rear
Panel
(Page 2-1)
Rubber
Belt
(Page 15)
Rubber
Belt
(Page 15)
Slider
(Page 26)
Loading
Gear (T, S)
(Page 28)
Retainer
 Plate
(Page 22)
MA-323
Board
(Page 2-2)
Rubber
Belt
(Page 15)
Capstan
Motor
(Page 15)
FL Slider
 Block Ass’y
(Page 22)
Rotary
Switch
(Page 2-2)
Tuner
Unit
Pully Gear
Ass’y
(Page 29)
Cam Motor
Retainer
(Page 31)
Cam Gear
(Page 23)
Cam Motor
(Page 31)
Reel Direct
Ass’y
(Page 30)
Page of 80
Display

Download Sony SLV-ED1PL / SLV-ED4KR / SLV-ED4PL / SLV-ED7KR / SLV-ED8PL Service Manual (Repair Manual)

Here you can read online and download Sony SLV-ED1PL / SLV-ED4KR / SLV-ED4PL / SLV-ED7KR / SLV-ED8PL Service Manual in PDF. SLV-ED1PL / SLV-ED4KR / SLV-ED4PL / SLV-ED7KR / SLV-ED8PL service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony SLV-ED1PL / SLV-ED4KR / SLV-ED4PL / SLV-ED7KR / SLV-ED8PL VCR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.