Read Sony SLV-E820B / SLV-E820BZ / SLV-E820NP / SLV-E820UX / SLV-E820VC / SLV-E870EG / SLV-E920B / SLV-E920EG / SLV-E920NP / SLV-E920UX / SLV-E920VC / SLV-E930B / SLV-E930NP / SLV-E930UX / SLV-E930VC Service Manual online
their corresponding models as given below.
model name
E820BZ
E820NP
E820UX
E820VC
E920NP
E920UX
E920VC
E820UX/E920UX:
UHF E21 to E69
VHF F2 to F10
CATV B to Q
HYPER S21 to S41
UHF F21 to F69
PAL (B/G)
VHF E2 to E12
VHF Italian channel A to H
CATV S01 to S05, S1 to S20
HYPER S21 to S41
UHF E21 to E69
VHF IA to IJ, SA10 to SA13
UHF B21 to B69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
… LINE-4 IN: E920
Video input: pin 20
Audio input: pins 2 and 6
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phone jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phone jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Approx. 5.1 kg: E920
R6 (size AA) batteries (2)
Aerial cable (1)
Audio cable (1)
EURO-AV cable (1)
without notice.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
dered connections. Check the entire board surface for solder
splashes and bridges.
“pinched” or contact high-wattage resistors.
tors, that were installed during a previous repair. Point them
out to the customer and recommend their replacement.
safety checks before releasing the set to the customer:
of deterioration. Point them out to the customer and recom-
mend their replacement.
Basic Operations ............................................................ 1-9
Additional Operations ..................................................... 1-12
Editing ............................................................................. 1-15
Additional Information ..................................................... 1-18
(E820) ............................................................................. 2-1
SCHEMATIC DIAGRAMS
RP-217 Printed Wiring Board ......................................... 4-5
RP-217 Schematic Diagram ........................................... 4-7
MA-287 Printed Wiring Board ........................................ 4-10
MA-287 (Video, Audio) Schematic Diagram ................... 4-13
MA-287 (Servo/System Control) Schematic Diagram .... 4-18
MA-287 (IN/OUT) Schematic Diagram ........................... 4-23
MA-287 (Tuner) Schematic Diagram .............................. 4-26
PP-15 Printed Wiring Board and Schematic Diagram .... 4-29
AL-11 Printed Wiring Board and Schematic Diagram .... 4-31
DM-62, FR-119, JK-152 Schematic Diagram ................ 4-33
DM-62, FR-119, JK-152 Printed Wiring Board ............... 4-37
PS-385 Printed Wiring Board ......................................... 4-39
PS-385 Schematic Diagram ........................................... 4-41
(MA-287 board IC160) .................................................... 5-1
(MA-287 board IC160) .................................................... 5-2
(MA-287 board IC160) .................................................... 5-3
Interface (MA-287 board IC160) ..................................... 5-4
(MA-287 board IC160) .................................................... 5-4
(MA-287 board IC160) .................................................... 5-5
(FR-119 board IC470) .................................................... 5-6
Factor Check ............................................................. 6-6
(E820) ........................................................................ 7-1
(E870EG/E920) ......................................................... 7-2