SLV-D993PAZ, SLV-D993PB, SLV-D993PE, SLV-D993PME, SLV-D998PD - Sony VCR Service Manual (repair manual). Page 16

1-6

27

S-Video/Component hookup

Select one of the following patterns 

A or B, according to the input jack on your TV monitor, 

projector, or AV amplifier (receiver).  You can enjoy higher quality images when playing DVDs.

Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT 
(COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/Component 
Video hookup.  See page 29 for audio connections.

If your TV accepts progressive (525p/625p) format signals, you must use the connection 

B.

COMPONENT VIDEO OUT

LINE OUT

COAXIAL

AUDIO

R

L

C

R

C

B

Y

l : Signal flow
          (DVD only)

S-VIDEO cord 
(not supplied)

to S-VIDEO OUT

Component video 
cord (not supplied)

(red)

(green) (blue)

to COMPONENT 
VIDEO OUT

28

S-Video/Component hookup

A Use this hookup if your TV has an S-VIDEO input jack
Connect an S-VIDEO cord (not supplied). You will enjoy high quality images.

B Use this hookup if your TV has component video input jacks
Connect a component video cord (not supplied) or three video cords (not supplied) of 
the same kind and length.  You will enjoy accurate color reproduction and high 
quality images. 
If your TV accepts progressive (525p/625p) format signals, you must use this 
connection and then set “Progressive” to “On” in the “SCREEN SETUP” menu.  For 
details, see “To set the “Progressive” setting” (page 56).

Notes
• The connection using S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only for 

the DVD player.  The signal from the VCR will not be output.

• In the connection using S-VIDEO OUT jack, if you set “Progressive” to “On” in the 

“SCREEN SETUP” menu, S-Video playback may be distorted.

29

A/V Receiver hookup

Select one of the following patterns 

A or B, accordiing to the input jack on your AV amplifier 

(receiver).  This will enable you to listen to DVD audio tracks through your AV amplifier 
(receiver).

For correct speaker location, see the operating instructions supplied with the connected 
components.

COMPONENT VIDEO OUT

LINE OUT

COAXIAL

AUDIO

R

L

C

R

C

B

Y

Front (R)

Front (L)

Subwoofer

l : Signal flow

Rear (L)

AV amplifier (receiver) 
with a decoder

Center

Rear (R)

Stereo audio cord 
(not supplied)

[Speakers]

(red)

(white)

[Speakers]

to audio input

(red)

(white)

to LINE OUT L/R (AUDIO)

to coaxial digital input

Coaxial digital cord 
(not supplied)

to DIGITAL AUDIO 
OUT (COAXIAL)

or

30

A/V Receiver hookup

A Connecting to audio L/R jacks
This connection uses a stereo amplifier’s (receiver’s) two front speakers for sound.
You can enjoy the surround function that creates virtual speakers from two stereo 
speakers.  Select from “Surround1”, “Surround2” or “Surround3” of the surround 
effects (page 74).

B Connecting to a digital audio (COAXIAL) input jack
Use this connection if your AV amplifier (receiver) has a Dolby*

1

 Digital or DTS*

2

decoder and a digital input jack.  You can enjoy the surround effect of Dolby Digital 
(5.1ch) or DTS (5.1ch).

*

1

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

*

2

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Note
• After you have completed the connection using DIGITAL AUDIO OUT (COAXIAL), be 

sure to set “Dolby Digital” to “Dolby Digital” and “DTS” to “On” in “AUDIO SETUP” 
menu (page 52).  Otherwise, no sound or a loud noise will come from the speakers.