Read Sony SLV-D973PE / SLV-D983PD / SLV-D983PGI Service Manual online
1-8
34
Playing discs
To playback quickly or slowly with sound (DVD only)
You can listen to dialog or sound while playing the current scene quickly or slowly.
To playback quickly, press
M during playback.
To playback slowly, press
X, then press
y
during playback.
Press
H t
o return to normal playback.
Notes
• You cannot set virtual surround effects while performing playback quickly or slowly with
sound. In addition, you cannot perform playback quickly or slowly with sound when a
virtual surround effect is set.
virtual surround effect is set.
• You cannot perform DTS audio output during playback quickly or slowly with sound.
In addition, you cannot perform playback quickly or slowly with sound when DTS audio
output is set.
output is set.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing
player enters standby mode by pressing
?/1.
Tip
• To begin playback from the top of the disc, press
x twice then press H.
Notes on playing DTS
*
sound tracks on a CD
• When playing DTS-encoded CDs, no audio out will be output from the analogue stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analogue stereo jacks of the DVD player are connected to an amplification system.
when the analogue stereo jacks of the DVD player are connected to an amplification system.
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL) jack even if “DTS” is set to “Off” in “AUDIO SETUP”
menu (page 54), and may affect your ears or cause your speakers to be damaged.
DIGITAL AUDIO OUT (COAXIAL) jack even if “DTS” is set to “Off” in “AUDIO SETUP”
menu (page 54), and may affect your ears or cause your speakers to be damaged.
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL) jack.
• When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”
• When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”
menu (page 54). You cannot select DTS audio stream when “DTS” is set to “Off”.
• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to
“On” in “AUDIO SETUP” menu (page 54). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
affecting your ears or causing the speakers to be damaged.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
1
While playing a disc, press
x to stop playback.
2
Press
H.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
Step 1.
35
Guide to the on-screen display
Ba
sic
sic
Op
er
atio
atio
ns
Guide to the on-screen display
Press DISPLAY during playback. The following information appears; type of disc, current
title/track, chapter, counter position, voice language, subtitle language and Custom AV Mode
setting. Refer to “DVD Audio/Subtitle Language” on page 118 for the abbreviation of the
language.
title/track, chapter, counter position, voice language, subtitle language and Custom AV Mode
setting. Refer to “DVD Audio/Subtitle Language” on page 118 for the abbreviation of the
language.
Note
• You cannot select disc information items when the disc is stopped.
You can check disc information during
playback.
playback.
The displayed contents differ according to
the type of disc being played.
the type of disc being played.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 10).
V/v/B/b
ENTER
Number
buttons
buttons
DISPLAY
O
RETURN
ENTER
1/3
1/36
Standard
v
V
b
B
~
0
9
ENG (3/5)
ENG 5.1CH
T 0:01:09
N
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
Custom AV Mode
continued
36
Guide to the on-screen display
To playback the desired title/track or chapter
You can playback the desired title/track or chapter using this menu.
The title/track or chapter icon will appear on the DVD playback screen followed by
the current title/track or chapter number and the counter position.
the current title/track or chapter number and the counter position.
To playback from the desired title/track counter position
You can playback the desired title/track counter position using this menu.
Tip
• You can change the counter position information (playing time or remaining time) using
B/b
(DVD and CD only).
DVD
CD
1
Press
V/v during playback to select the desired item.
2
Press
B/b to change the item.
3
Press ENTER to start playback.
4
Press DISPLAY or
O RETURN to turn off the
menu.
1
Press
V/v during playback to select the counter
position icon.
2
Enter the desired elapsed playing time of the current
title/track using the number buttons.
title/track using the number buttons.
3
Press ENTER to start playback.
4
Press DISPLAY or
O RETURN to turn off the
menu.
Indication
Counter information
T
∗
:
∗∗
:
∗∗
Elapsed playing time of the current title
T–
∗
:
∗∗
:
∗∗
Remaining time of the current title
C
∗
:
∗∗
:
∗∗
Elapsed playing time of the current chapter
C–
∗
:
∗∗
:
∗∗
Remaining time of the current chapter
Indication
Counter information
T
∗
:
∗∗
:
∗∗
Elapsed playing time of the current track
T–
∗
:
∗∗
:
∗∗
Remaining time of the current track
D
∗
:
∗∗
:
∗∗
Elapsed playing time of the disc
D–
∗
:
∗∗
:
∗∗
Remaining time of the disc
ENTER
1/3
1/36
Standard
N
v
V
b
B
~
0
9
ENG (3/5)
ENG 5.1CH
T 0:01:09
ENTER
1/3
1/36
Standard
N
v
V
b
B
~
0
9
ENG (3/5)
ENG 5.1CH
T 0:01:09
37
Guide to the on-screen display
Ba
sic
sic
Op
er
atio
atio
ns
Notes
• The display may not change as operated depending on the disc.
• The display window continue indicating the playing time even when the counter position
• The display window continue indicating the playing time even when the counter position
information on the on-screen display is being changed.
• The remaining time of the current track and the disc may not be indicated correctly for Copy
Control CDs, CD EXTRA or CDs with jacket pictures on the disc, etc.
To adjust the playback picture (Custom AV Mode)
You can adjust the video signal of the DVD or VIDEO CD (with PBC function off)
from the player to obtain the picture quality you want. Choose the setting that best
suits the programme you are watching.
from the player to obtain the picture quality you want. Choose the setting that best
suits the programme you are watching.
Tip
• When you watch a movie, “Cinema 1” or “Cinema 2” is recommended.
1
Press
V/v during playback to select the Custom AV
Mode icon.
2
Press
B/b to change the setting.
1/3
1/36
Standard
N
v
V
b
B
ENG (3/5)
ENG 5.1CH
T 0:01:09
Setting
Video Setting
Audio Setting
Dynamic 2
Produces a more dynamic
picture than Dynamic 1 by
further increasing the picture
contrast and the colour intensity.
picture than Dynamic 1 by
further increasing the picture
contrast and the colour intensity.
Full (modulated) sound with
even clearer treble and bass than
Dynamic 1.
even clearer treble and bass than
Dynamic 1.
Dynamic 1
Produces a bold dynamic picture
by increasing the picture contrast
and the colour intensity.
by increasing the picture contrast
and the colour intensity.
Full (modulated) sound with
clear treble and bass.
clear treble and bass.
Standard
Off (Default setting)
Displays a standard picture.
Displays a standard picture.
Standard sound.
Cinema 1
White colours become brighter
and black colours become richer,
and the colour contrast is
increased.
and black colours become richer,
and the colour contrast is
increased.
Powerful sound with strong bass.
Cinema 2
Enhances details in dark areas by
increasing the black level.
increasing the black level.
Powerful sound with even
stronger bass than Cinema 1.
stronger bass than Cinema 1.
Click on the first or last page to see other SLV-D973PE / SLV-D983PD / SLV-D983PGI service manuals if exist.