Read Sony SLV-D970PB / SLV-D970PE / SLV-D970PN / SLV-D970PR / SLV-D975PE / SLV-D980PD / SLV-D980PGI Service Manual online
1-3
14
Connecting the DVD-VCR
Additional connections
To a satellite or digital tuner
with Line Through
with Line Through
Using the Line Through
function, you can watch
programmes from a satellite or
digital tuner connected to this
DVD-VCR on the TV even
when the DVD-VCR is turned
off. When you turn on the
satellite or digital tuner, this
DVD-VCR automatically sends
the signal from the satellite or
digital tuner to the TV without
turning itself on.
function, you can watch
programmes from a satellite or
digital tuner connected to this
DVD-VCR on the TV even
when the DVD-VCR is turned
off. When you turn on the
satellite or digital tuner, this
DVD-VCR automatically sends
the signal from the satellite or
digital tuner to the TV without
turning itself on.
Notes
• This function may not work with some types of satellite or digital tuners.
• When the DVD-VCR is turned off, set the TV to the video channel.
• The Line Through function will not operate properly if “Power Save” in “OPTION” menu is
• When the DVD-VCR is turned off, set the TV to the video channel.
• The Line Through function will not operate properly if “Power Save” in “OPTION” menu is
set to “On.” Set “Power Save” to “Off” to ensure proper operation.
1
Connect the satellite or digital tuner to the LINE-3 connector as shown above.
2
Turn off the DVD-VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Scart cable (not supplied)
LINE OUT
: Signal flow
LINE-3
Getti
ng Sta
rted
15
Setting up the DVD-VCR with the Auto Set Up function
Step 4 : Setting up the DVD-VCR with the
Auto Set Up function
Before using the DVD-VCR for the first
time, set up the DVD-VCR using the Auto
Set Up function. With this function, you can
set TV channels, guide channels for the
ShowView system*, and DVD-VCR clock
automatically.
time, set up the DVD-VCR using the Auto
Set Up function. With this function, you can
set TV channels, guide channels for the
ShowView system*, and DVD-VCR clock
automatically.
* SLV-D980P D only
Before you start…
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 10).
remote (page 10).
1
Turn on your TV and set it to the video channel.
If your TV does not have a Scart (EURO-AV) connector, tune the TV to
channel 32 (the initial RF channel for this DVD-VCR). Refer to your TV
manual for TV tuning instructions. If the picture does not appear clearly,
see “To change the RF channel” on page 17.
channel 32 (the initial RF channel for this DVD-VCR). Refer to your TV
manual for TV tuning instructions. If the picture does not appear clearly,
see “To change the RF channel” on page 17.
2
Connect the mains lead to the mains.
The DVD-VCR automatically turns on and the
“LANGUAGE SET” menu appears.
“LANGUAGE SET” menu appears.
V/v/B/b
ENTER
SET UP
RETURN
LANGUAGE SET
SET UP
ENTER
v
V
English
Français
Deutsch
Français
Deutsch
B
Español
Italiano
Nederlands
Italiano
Nederlands
continued
16
Setting up the DVD-VCR with the Auto Set Up function
3
Press
V/v to select the desired language, then
press ENTER repeatedly.
The “COUNTRY SELECTION” menu
appears.
appears.
The abbreviations of the countries
are as follows:
are as follows:
4
Press
V/v/B/b to select the abbreviation of
your country from the table in step 3, then press
ENTER.
If your country does not appear, select “Others.”
The DVD-VCR starts searching for all of the
receivable channels and presets them (in the
appropriate order for your local area).
ENTER.
If your country does not appear, select “Others.”
The DVD-VCR starts searching for all of the
receivable channels and presets them (in the
appropriate order for your local area).
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme positions” on
page 24.
programme positions, see “Changing/disabling programme positions” on
page 24.
After the search is complete, the current time appears for any stations that
transmit a time signal. If the time does not appear, set the clock manually.
See “Setting the clock” on page 20.
transmit a time signal. If the time does not appear, set the clock manually.
See “Setting the clock” on page 20.
ENTER
A
DK
B
FIN
D
D
NL
N
I
P
E
E
S
TR
CH
GR
HU
HU
PL
Others
CZ
RETURN
COUNTRY SELECTION
SET UP
ENTER
v
V
b
B
Abbreviation
Country
A
Austria
B
Belgium
DK
Denmark
FIN
Finland
D
Germany
NL
Netherlands
I
Italy
N
Norway
P
Portugal
E
Spain
S
Sweden
CH
Switzerland
TR
Turkey
GR
Greece
HU
Hungary
PL
Poland
CZ
Czech
Abbreviation
Country
ENTER
Please wait
RETURN
AUTO SETUP
SET UP
10%
Getti
ng Sta
rted
17
Setting up the DVD-VCR with the Auto Set Up function
To cancel the Auto Set Up function
Press SET UP.
To change the RF channel
If the picture does not appear clearly on the TV, change the RF channel on the DVD-
VCR and TV. Select “Install” in the “OPTION” menu, then press
VCR and TV. Select “Install” in the “OPTION” menu, then press
V/v to select
“Video Output CH.” Select the RF channel by pressing the
B/b buttons and press
ENTER. Then, tune the TV to the new RF channel so that a clear picture appears.
Tip
• If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 18.
Notes
• Whenever you operate the Auto Set Up function, some of the settings (ShowView, timer, etc.)
will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first time after
you purchase the DVD-VCR.
• If you want to use the Auto Set Up function again, select “Install” in the “OPTION” menu,
then press
V/v to select “Auto Setup,” then repeat step 3.
• Auto preset can be performed by pressing
x on the unit continuously for 5 seconds or more
during power off with no tape inserted.
Click on the first or last page to see other SLV-D970PB / SLV-D970PE / SLV-D970PN / SLV-D970PR / SLV-D975PE / SLV-D980PD / SLV-D980PGI service manuals if exist.