SLV-D940PAZ, SLV-D940PEA, SLV-D940PME - Sony VCR Service Manual (repair manual). Page 12

Read Sony SLV-D940PAZ / SLV-D940PEA / SLV-D940PME Service Manual online

1-2
12
Connecting the DVD-VCR
Additional connections
To a TV that has audio/

video input jacks
This additional connection 
improve picture and sound 
quality.  Connect the TV as 
shown on the right.
Audio/video cord (not supplied)
LINE OUT
LINE IN
Getti
ng Sta
rted
13
Setting up the DVD-VCR with the Auto Set Up function
Step 4 : Setting up the DVD-VCR with the 
Auto Set Up function
Before using the DVD-VCR for the first 
time, set up the DVD-VCR using the Auto 
Set Up function.  With this function, you can 
set TV channels automatically. 

Before you start…
• To control the DVD-VCR, set TV / 
DVD·VIDEO to DVD·VIDEO on the 
remote (page 9).
1
Turn on your TV and set it to the video channel.
Tune the TV to channel 68 (in Australia), channel 63 (in New Zealand) or 
channel 32 (the initial RF channel for this DVD-VCR).  Refer to your TV 
manual for TV tuning instructions.  If the picture does not appear clearly, 
see “To change the RF channel” on page 15.
V/v/B/b
ENTER
SET UP
continued
14
Setting up the DVD-VCR with the Auto Set Up function

To cancel the Auto Set Up function
Press SET UP.
2
Connect the mains lead to the mains.
SLV-D940P AZ
The DVD-VCR automatically turns on and the 
“SYSTEM SELECTION” menu appears.
Step 3 is skipped.

SLV-D940P ME/EA
The DVD-VCR automatically turns on and the 
“LANGUAGE SET” menu appears.
Press V/v to select the desired language, then 
press ENTER.
The message for the Auto Set Up function 
appears.
3
Press ENTER.
The “SYSTEM SELECTION” menu appears.
4
Press V/v to select the appropriate TV system, 
then press ENTER.
The DVD-VCR starts searching for all of the 
receivable channels and presets them (in the 
appropriate order for your local area).
If you want to change the order of the channels 
or disable unwanted programme positions, see 
“Changing/disabling programme positions” on page 23.
After the search is complete, the clock setting menu appears.  See “Setting 
the clock” on page 17.
ENTER
RETURN
SYSTEM SELECTION
SET UP
ENTER
v
V
SYSTEM - B/G (NEW ZEALAND)
SYSTEM - B/B (AUSTRALIA)
RETURN
LANGUAGE SET
SET UP
ENTER
v
V
English
Français
Deutsch
B
Español
Italiano
Nederlands
ENTER
RETURN
SYSTEM SELECTION
SET UP
ENTER
v
V
SYSTEM - B/G
SYSTEM - D/K
SYSTEM - I
ENTER
Please wait
RETURN
AUTO SETUP
SET UP
10%
Getti
ng Sta
rted
15
Setting up the DVD-VCR with the Auto Set Up function

To change the RF channel
If the picture does not appear clearly on the TV, change the RF channel on the DVD-
VCR and TV.  Select “Install” in the “OPTION” menu, then press V/v to select 
“Video Output CH.”  Select the RF channel by pressing the B/b buttons and press 
ENTER.  Then, tune the TV to the new RF channel so that a clear picture appears.

Tip
• If you want to change the language for the on-screen display from the one preset in the Auto 
Set Up function, see page 16.

Notes
• Whenever you operate the Auto Set Up function, some of the settings (timer etc.) will be 
reset.  If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first time after 
you purchase the DVD-VCR.
• If  you want to use the Auto Set Up function again, select “Install” in the “OPTION” menu, 
then press V/v to select “Auto Setup,” then repeat step 3.
• Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more 
during power off with no tape inserted.
• The Line Through function will not operate properly if “Power Save” in “OPTION” menu is 
set to “On.”  Set “Power Save” to “Off” to ensure proper operation.
Display
Click on the first or last page to see other SLV-D940PAZ / SLV-D940PEA / SLV-D940PME service manuals if exist.
Random: