Read Sony SLV-D920B / SLV-D920E / SLV-D920N / SLV-D920R / SLV-D925E / SLV-D930D / SLV-D930GI / SLV-D960PB / SLV-D960PE Service Manual online
1-6
28
Playing discs
Additional tasks
*
1
If you pause the DVD player for more than 5 minutes, the DVD player will automatically
stop.
stop.
*
2
For DVD VIDEOs and the DVD-RWs/DVD-Rs or DVD+RWs/DVD+Rs only
*
3
You can press
SKIP up to 4 times. This allows you to fast forward up to 2 minutes in
total.
Tips
• The Instant Replay function is useful when you want to review a scene or dialogue that you
• The Instant Replay function is useful when you want to review a scene or dialogue that you
missed.
• The Instant Advance function is useful when you want to pass over a scene that you don’t
want to watch.
2
Press
H.
The disc tray closes and the DVD player starts playback.
The display window shows the
playback time.*
Depending on the disc, a menu
may appear on the TV screen.
For DVDs, see page 66. For
VIDEO CDs, see page 88.
The display window shows the
playback time.*
Depending on the disc, a menu
may appear on the TV screen.
For DVDs, see page 66. For
VIDEO CDs, see page 88.
* “– – – – –” appears when no disc
is loaded.
To
Press
Stop play
x
Pause play*
1
X
Resume play after pause
H
Go to the next frame in pause mode
SKIP
Go to the previous frame in pause
mode
mode
REPLAY
Go to the next chapter, track, or scene
in continuous play mode
in continuous play mode
> NEXT on the remote or M on the unit
Go back to the previous chapter, track,
or scene in continuous play mode
or scene in continuous play mode
. PREV on the remote or m on the unit
Replay the previous scene for 10
seconds in continuous play mode*
seconds in continuous play mode*
2
(Instant Replay)
REPLAY
Briefly fast forward the current scene
for 30 seconds in continuous play
mode*
for 30 seconds in continuous play
mode*
2
*
3
(Instant Advance)
SKIP
Stop play and remove the disc
Z
Hour Minute Second
29
Playing discs
Ba
s
s
ic
O
p
p
er
at
at
ions
Notes
• You may not be able to use the Instant Replay or Instant Advance function with some scenes.
• Switching between original (ORG) and play list (PL) within a disc recorded in VR mode is
• You may not be able to use the Instant Replay or Instant Advance function with some scenes.
• Switching between original (ORG) and play list (PL) within a disc recorded in VR mode is
possible only while the disc is stopped. Press TOP MENU to switch between ORG and PL.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing
player enters standby mode by pressing
?/1.
Tip
• To begin playback from the top of the disc, press
• To begin playback from the top of the disc, press
x twice then press H.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode
in continuous play mode
Press
m or M on the remote (or hold down m or M on the unit).
Each time you press the button, the playback speed changes as follows.
• DVD:
PLAY
t FF1/FR1 t FF2/FR2 t FF3/FR3 t FF4/FR4 t FF5/FR5 t
FF6/FR6
• CD, MP3 and VIDEO CD:
PLAY
t FF1/FR1 t FF2/FR2 t FF3/FR3
When you find the point you want, press
H.
Note
• The fast reverse operation may not be possible for CD, MP3 and VIDEO CD depending on
• The fast reverse operation may not be possible for CD, MP3 and VIDEO CD depending on
the recording method.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
only)
Press
X, then press
or
y
. With each press, the playback speed changes
cyclically as follows.
* You can not watch reverse slow motion with DVD-RW in VR mode. Reverse slow motion
playback also may not be possible for some VIDEO CDs depending on the recording
method.
method.
To resume normal playback, press
H.
Tips
• To make a video timer reservation during DVD playback, we recommend performing the
• To make a video timer reservation during DVD playback, we recommend performing the
operations under “Quick Timer Recording” (page 90).
• During DVD playback, DVD-VCR does not standby even if the VCR stops recording.
1
While playing a disc, press
x to stop playback.
2
Press
H.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
Step 1.
continued
30
Playing discs
Notes
• You can change the screen type using the “SCREEN SETUP” menu. (See “Screen Setup” on
• You can change the screen type using the “SCREEN SETUP” menu. (See “Screen Setup” on
page 58.)
• Do not perform VIDEO playback while playing back a disc.
• If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
• If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point of the scratch.
• Except for during normal play or FF1 play, no sound is output.
• Discs recorded in VR mode with Once Copy signal cannot be played because of copyright
• Discs recorded in VR mode with Once Copy signal cannot be played because of copyright
protection.
• Playback of play lists longer than 10 hours recorded in VR mode is not guaranteed.
Notes on playing DTS* sound tracks on a CD
• When playing DTS-encoded CDs, no audio out will be output from the analogue stereo jacks.
• When playing DTS-encoded CDs, no audio out will be output from the analogue stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analogue stereo jacks of the DVD player are connected to an amplification system.
when the analogue stereo jacks of the DVD player are connected to an amplification system.
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in
“AUDIO SETUP” menu (page 56), and may affect your ears or cause your speakers to be
damaged.
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in
“AUDIO SETUP” menu (page 56), and may affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”
menu (page 56). You cannot select DTS audio stream when “DTS” is set to “Off”.
• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to
“On” in “AUDIO SETUP” menu (page 56). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
affecting your ears or causing the speakers to be damaged.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
31
Guide to the on-screen display
Ba
s
s
ic
O
p
p
er
at
at
ions
Guide to the on-screen display
Press DISPLAY during playback. The following information appears; type of disc,
current title/track, chapter, counter position, voice language, subtitle language and
Custom AV Mode setting. Refer to “DVD Audio/Subtitle Language” on page 119 for
the abbreviation of the language.
current title/track, chapter, counter position, voice language, subtitle language and
Custom AV Mode setting. Refer to “DVD Audio/Subtitle Language” on page 119 for
the abbreviation of the language.
Note
• You cannot select disc information items when the disc is stopped.
• You cannot select disc information items when the disc is stopped.
You can check disc information during
playback.
playback.
The displayed contents differ according to
the type of disc being played.
the type of disc being played.
V/v/B/b
ENTER
ENTER
Number
buttons
buttons
DISPLAY
O RETURN
ENTER
1/3
1/36
Standard
N
v
V
b
B
~
0
9
ENG (3/5)
ENG 5.1CH
T 0:01:09
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
Custom AV Mode
continued
Click on the first or last page to see other SLV-D920B / SLV-D920E / SLV-D920N / SLV-D920R / SLV-D925E / SLV-D930D / SLV-D930GI / SLV-D960PB / SLV-D960PE service manuals if exist.