Read Sony SLV-AV100B / SLV-AV100NP / SLV-AV100UX / SLV-AV100VC Service Manual online
8-11
2-7-7. E-E Output Level Check
Mode
E-E
Signal
400Hz, – 7.5dBs : Audio line in
Measurement
Audio tape/MD REC out terminal
point
Measuring
Audio level meter
instrument
Specified
– 7.5±2dBs
value
[Check Method]
1) Input signal of 400Hz and –7.5dBs to the L and R channel of the
1) Input signal of 400Hz and –7.5dBs to the L and R channel of the
audio input at the same time.
2) Check that the audio output level is –7.5±2dBs.
2-7-8. Overall Output Level and Distortion Factor Check
Mode
Self-record playback
Signal
400Hz, –7.5dBs : Audio Line Input
terminals, left and right
Measurement
Audio tape/MD REC out terminal
point
Measuring
Audio level meter and Distortion meter
instrument
Specified
Playback Level : –7.5±3dBs
value
Distortion : 4.0% or less
[Check Method]
1) Record signal.
2) Playback the recorded portion.
3) Check that the output level is –7.5±3dBs.
4) Check that the distortion factor is 4.0% or less on the left and
1) Record signal.
2) Playback the recorded portion.
3) Check that the output level is –7.5±3dBs.
4) Check that the distortion factor is 4.0% or less on the left and
right side.
2-7-9. Overall Noise Level Check
Mode
Self-record playback
Signal
No signal (Insert a shorting plug into the
Audio Line Input jacks, left and right.)
Measurement
Audio tape/MD REC out terminal
point
Measuring
Audio level meter
instrument
Specified
–46dBs or less
value
[Check Method]
1) Record.
2) Playback recorded portion.
3) Check that noise level is –46dBs or less on the left and right side.
1) Record.
2) Playback recorded portion.
3) Check that noise level is –46dBs or less on the left and right side.
•
Normal Audio System Adjustment
• Adjust in the SP mode if there is no special indications.
• Perform the adjustment setting the switch on the following positions.
•
• Perform the adjustment setting the switch on the following positions.
•
AUDIO
switch ............................................................... LINE
•
AUDIO MONITOR
switch * ............................ NORMAL*
1
*1 : No indicates on the display window indicator and monitor TV.
[Adjustment Sequence]
1) ACE head adjustment ....... Refer to the VHS mechanical part
1) ACE head adjustment ....... Refer to the VHS mechanical part
adjustment manual IV
2) Recording bias check
3) E-E output level check
4) Overall output level and distortion factor check.
5) Overall noise level check.
3) E-E output level check
4) Overall output level and distortion factor check.
5) Overall noise level check.
2-7-5. ACE Head Adjustment
Refer to the "VHS Mechanical adjustment manual IV"
(9-973-623-11).
(9-973-623-11).
2-7-6. Recording Bias Check (MA-283 Board)
Mode
Self-record playback
Signal
400Hz, – 27.5dBs Audio line in
7kHz, – 27.5dBs (L or R)
Measurement
Audio tape/MD REC out terminal
point
Measuring
Audio level meter
instrument
Specified
0±3dBs
value
[Adjusting Method]
1) Supply a signal of 400Hz, –27.5dBs to Audio Line Input.
2) Connect the audio level meter to the Audio Line Output.
3) Adjust the attenuator so that the audio level meter will indicate
1) Supply a signal of 400Hz, –27.5dBs to Audio Line Input.
2) Connect the audio level meter to the Audio Line Output.
3) Adjust the attenuator so that the audio level meter will indicate
–27.5dBs.
4) Make recording in the SP mode.
5) Set an audio line input signal to 7kHz and make recording.
6) Playback a recorded portion, and measure output levels at 400Hz
5) Set an audio line input signal to 7kHz and make recording.
6) Playback a recorded portion, and measure output levels at 400Hz
and 7kHz.
7) Confirm that the 7kHz playback output levels within a range of
the 400Hz playback output level 0±3dB.
Click on the first or last page to see other SLV-AV100B / SLV-AV100NP / SLV-AV100UX / SLV-AV100VC service manuals if exist.