Read Sony SLV-AV100B / SLV-AV100NP / SLV-AV100UX / SLV-AV100VC Service Manual online
– 2 –
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer :
safety checks before releasing the set to the customer :
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
replacement.
5. Check the line cord for cracks and abrasion. Recommend the
replacement of any such line cord to the customer.
6. Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C during
repairing.
• Do not touch the soldering iron on the same conductor of the cir
cuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED LINE
WITH MARK
!
ON THE SCHEMATIC DIAGRAMS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
Recording/Playing broadcast systems
B/G
B/G
B/G
I
(MA-283 BOARD)
L NICAM
NICAM
NICAM
Recording Canal +/PAY–TY
programmes
®
®
®
—
(IO-56 BOARD)
Recording/Playing SECAM
®
—
—
—
(MA-283, RP-213, TK-39 BOARD)
Recording TV programmes
SHOW VIEW SHOW VIEW SHOW VIEW VIDEO Plus+
(G-CODE/SHOW VIEW/VIDEO Plus+)
NP
(Spanish)
B
(French)
VC
(AEP)
UX
(UK)
MODEL
FEATURE
DESTINATION DIFFERENCE SCHEMATIC COMPONENT TABLE LIST
This manual are for the SLV-AV100B/NP/UX/VC. Check model number by locking at the rear panel of VCR.
The remote commander
used for each model is
as follows.
used for each model is
as follows.
• RMT-V193 :
SLV-AV100UX
• RMT-V193A :
SLV-AV100B/NP/VC
Click on the first or last page to see other SLV-AV100B / SLV-AV100NP / SLV-AV100UX / SLV-AV100VC service manuals if exist.