Read Sony SLV-999HF / SLV-M11HF / SLV-M91HF Service Manual online
1-5
Additional Operations
20
Playing/searching at various speeds (continued)
Mark on the TV screen
Slow motion
Pause
Slow motion
in reverse
Playback mode
Normal speed
Double speed
High speed
High speed
Double speed
Normal speed
in reverse
in reverse
in reverse
X 2
X 2
–
X 1
–
Playback options
Operation
Replay a scene
Rewind and start play
To resume normal playback
Press
H PLAY.
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.
are two ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or
counterclockwise. Each change in the shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:
counterclockwise. Each change in the shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:
During playback, first press CLEAR when you come to a scene
you want to replay later. When you are ready to replay the
scene, press
you want to replay later. When you are ready to replay the
scene, press
x STOP. Then press TAPE RETURN and
H PLAY in quick succession.
During stop, press
H PLAY on the VCR while holding down
m REW on the VCR.
21
Additional Operations
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button goes off.
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button goes off.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– The picture shakes while pausing.
– The picture shakes while pausing.
To set tracking to the center position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
• The sound is muted during these operations.
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• The picture may have snow:
– when playing at high speed in reverse
– when playing in reverse slow motion
– when playing in reverse
– when playing in reverse slow motion
– when playing in reverse
• If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.
• The picture may flutter a bit when playing in slow motion.
• The picture may flutter a bit when playing in slow motion.
Additional Operations
22
Creating a
favorite channel
list with Station
ID
favorite channel
list with Station
ID
You can create your favorite channel list
of the TV channels with station ID. You
can store up to 10 channels with station
ID and select the channel from your
favorite channel list.
of the TV channels with station ID. You
can store up to 10 channels with station
ID and select the channel from your
favorite channel list.
Before you start...
• Set FAVORITE CH to ON in the
ADVANCED OPTIONS menu
(page␣33).
(page␣33).
Creating your favorite channel list
1
Press ENTER.
The FAVORITE CH screen appears on the TV screen.
2
Press CH +/– to select the station ID you
want to replace.
want to replace.
You can also use the cursor stick
M/m instead.
3
Move the cursor stick
</, to select the
station ID you want to set.
4
Repeat steps 2 and 3 to set the station IDs as required.
5
Press ENTER.
You can also use the cursor stick (OK) instead.
Note
• If the TV channel has no station ID, the channel number appears on the TV screen.
• If the TV channel has no station ID, the channel number appears on the TV screen.
Cursor stick
M/m/</,
OK
M/m/</,
OK
The selected station ID
ENTER
CH +/–
IJK
OPQ
CDE
LMN
LMN
RST
AAB
ABB
XYZ
AAB
ABB
XYZ
UVW
FGH
FAVORITE CH
12
15
15
9
13
19
19
3
45
43
22
10
43
22
10
IJK
OPQ
BBA
LMN
RST
AAB
ABB
XYZ
AAB
ABB
XYZ
UVW
FGH
FAVORITE CH
12
15
27
13
19
15
27
13
19
3
45
43
22
10
43
22
10
1
2
3
4
5
6
7
8
9
0
23
Additional Operations
1
Turn on your TV and set it to the video channel.
To choose a channel from a cable box, turn the cable box on.
2
Press ENTER.
Your FAVORITE CH screen appears on the TV
screen.
screen.
3
Press CH +/– to select the station ID you
want.
want.
You can also use the cursor stick
M/m instead.
4
Press ENTER.
You can also use the cursor stick (OK) instead.
Note
• If the TV channel has no station ID, the channel number appears on the TV screen.
• If the TV channel has no station ID, the channel number appears on the TV screen.
The selected station ID
Selecting a channel from
your favorite channel list
your favorite channel list
Cursor stick
M/m
OK
M/m
OK
ENTER
CH +/–
1
2
3
4
5
6
7
8
9
0
IJK
OPQ
BBA
LMN
RST
AAB
ABB
XYZ
AAB
ABB
XYZ
UVW
FGH
FAVORITE CH
12
15
27
13
19
15
27
13
19
3
45
43
22
10
43
22
10
IJK
OPQ
BBA
LMN
RST
AAB
ABB
XYZ
AAB
ABB
XYZ
UVW
FGH
FAVORITE CH
12
15
27
13
19
15
27
13
19
3
45
43
22
10
43
22
10
Click on the first or last page to see other SLV-999HF / SLV-M11HF / SLV-M91HF service manuals if exist.