Read Sony GV-HD700 (serv.man2) Service Manual online
2-1
2. DISASSEMBLY
GV-HD700/HD700E_L2
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Tweezers etc.
Harness
(coaxial cable)
(coaxial cable)
When disconnecting the harness (coaxial cable), do not pull the
harness part but pull off the connector body with tweezers etc.
harness part but pull off the connector body with tweezers etc.
NOTE FOR DISCONNECTION THE HARNESS (COAXIAL CABLE)
Click on the first or last page to see other GV-HD700 (serv.man2) service manuals if exist.