Read Sony XBR-65HX925 (serv.man3) Service Manual online
XBR-65HX925 A-2
APPENDIX A - REMOVING THE REAR COVER
REMOVING THE POWER CORD FROM THE
REAR COVER
The AC Power Cord is connected to the Power Supply Board and
then routed out through the Rear Cover. When removing the Rear
Cover use caution to avoid pulling the AC Power Cord which may
damage the cord.
Caution: These instructions should be followed whenever
removing the Rear Cover.
1. Remove all screws, include the screw in the AC cover,
from the Rear Cover.
(For detailed information, refer to
“Rear Cover
Removal” on page 41
.)
2. Using a small flat-head screwdriver, push the tab to the
right to lift out the Wireless Antenna Cover located on
the bottom right side of the Rear Cover.
3. Using gloves or a cloth for protection against the sharp
edges, grasp the corner of the Rear Cover from inside
the Wireless Antenna Cover and lift up.
Click on the first or last page to see other XBR-65HX925 (serv.man3) service manuals if exist.