Read Sony XBR-55X905A / XBR-65X905A Service Manual online
XBR-55X905A/65X905A 23
SECTION 3 - REPAIR INFORMATION
REMOVING THE SIDE SPEAKERS
1. Remove 14 screws from Speaker Cover, lift as shown to disconnect
connector from PWB Board, then slide it through the Speaker Cover
opening to detach.
opening to detach.
2. Locate and remove 2 screws from PWB Board, then release harness to
detach.
PWB Board
PWB Board
3. Carefully disconnect all remaining connectors from PWB Board and lift to
detach.
4. Lift Speaker (80MM) to detach. Release 2 locking clips to remove
Speaker Bracket, then lift Speaker Ornament to detach.
Speaker (80MM)
Speaker (80MM)
Speaker
Bracket
Bracket
Speaker
Bracket
Bracket
Speaker
Ornament
Ornament
Speaker
Ornament
Ornament
5. Remove 2 screws from Speaker (18MM) and lift to detach.
Speaker (18MM)
Speaker (18MM)
6. Remove 2 screws from TW Bracket and lift to detach.
TW Bracket
TW Bracket
7. Lift Loud Speaker to detach. Release 2 locking clips to remove Speaker
Bracket and lift Speaker Ornament to detach.
Loud Speaker
(Passive Radiator)
(Passive Radiator)
Loud Speaker
(Passive Radiator)
(Passive Radiator)
Speaker
Bracket
Bracket
Speaker
Bracket
Bracket
Speaker
Ornament
Ornament
Speaker
Ornament
Ornament
8. Refer to these instructions to remove the opposite Side Speakers.
NOTE: Use a 7mm Metric Nut Driver to remove:
Spacer (SP-RC), HEX.
Spacer (SP-RC), HEX.
Click on the first or last page to see other XBR-55X905A / XBR-65X905A service manuals if exist.