XBR-55X800B - Sony TV Service Manual (repair manual). Page 3

Read Sony XBR-55X800B Service Manual online

XBR-55X800B ii
CAUTION!!
These servicing instructions are for use by qualified service personnel only. 
To reduce the risk of electric shock, do not perform any servicing other than 
that contained in the operating instructions unless you are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to avoid possible 
shock hazard, in case of live chassis. 
!
 
SAFETY-RELATED COMPONENT WARNING!!
There are critical components used in LCD color TVs that are important for 
safety. These components are identified with shading and 
!
 
mark on the 
schematic diagrams and the parts list. It is essential that these critical parts 
be replaced only with the part number specified in the parts list to prevent 
electric shock, fire or other hazard.
NOTE: Do not modify the original design without obtaining written permission 
from the manufacturer or you will void the original parts and labor warranty.
ATTENTION!!
For  safety  reasons,  component  level  repair  of  the  Power  Supply  Boards 
and/or the Inverter Boards is prohibited.
 
CAUTIONS AND WARNINGS
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety 
checks before releasing the set to the customer:
1. 
Check the area of your repair for unsoldered or poorly soldered 
connections. Check the entire board surface for solder splashes 
and bridges.
2. 
Check the interboard wiring to ensure that no wires are “pinched” or 
touching high-wattage resistors.
3. 
Check that all control knobs, shields, covers, ground straps and 
mounting hardware have been replaced. Be absolutely certain that 
you have replaced all the insulators.
4. 
Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
5. 
Look for parts which, though functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
6. 
Check the line cords for cracks and abrasion. Recommend the 
replacement of any such line cord to the customer.
7. 
Check the antenna terminals, metal trim, “metallized” knobs, screws 
and all other exposed metal parts for AC leakage. Check leakage 
as described in “Leakage Test”.
Page of 30
Display

Click on the first or last page to see other XBR-55X800B service manuals if exist.