Read Sony XBR-55HX955 / XBR-65HX955 Service Manual online
XBR-55HX955/65HX955 37
SECTION 5 - UPDATES AND ADJUSTMENTS
RESOLVING AN 8 BLINK ERROR
It’s possible that a customer may report an 8X blink error code even though
an 8X blink error isn’t an option in the Self Diagnosis Self Check list. An 8X
blink error is mainly used during TV software development. To verify that
there is an actual 8X error, view the TV’s Self Check Diagnosis history list,
specifically at the bottom of the list WDT (Watch Dog Timer) error codes.
The 8X error code could be the result of:
The 8X error code could be the result of:
●
Software Issue
●
Network Issue
●
Skype Login Issue
●
Incompatible USB Device Plugged Inserted
●
Defective Main Board
Every time 3 errors are registered in the Self Diagnosis Self Check screen
the TV will shut down and activate an 8X blink pattern on the Standby LED.
If an error count is indicated, usually as an 103 HOST_WDT error, follow
these instructions to update the TV.
SELF CHECK
000 RESERVED
----------------- ----------------- ----------------- 00
000 RESERVED
----------------- ----------------- ----------------- 00
002 MAIN_POWE ----------------- ----------------- ----------------- 00
003 DC_ALERT
003 DC_ALERT
----------------- ----------------- ----------------- 00
003 AUD_PROT
----------------- ----------------- ----------------- 00
003 HDMI_EQ
----------------- ----------------- ----------------- 00
003 TU_DEMOD ----------------- ----------------- ----------------- 00
004 VLED
004 VLED
----------------- ----------------- ----------------- 00
004 LD_ERR
----------------- ----------------- ----------------- 00
005 HFR_ERR
----------------- ----------------- ----------------- 00
005 TCON_ERR
----------------- ----------------- ----------------- 00
005 P_ID-ERR
----------------- ----------------- ----------------- 00
006 BACKLITE
----------------- ----------------- ----------------- 00
007 TEMP_ERR
----------------- ----------------- ----------------- 00
007 FAN_ERR
----------------- ----------------- ----------------- 00
010 EMITTER
----------------- ----------------- ----------------- 00
101 VPC_WDT
----------------- ----------------- ----------------- 00
102 MEPS_WDT ----------------- ----------------- ----------------- 00
103 HOST_WDT 1201231325 1201231136 ----------------- 03
104 STBY_WDT
103 HOST_WDT 1201231325 1201231136 ----------------- 03
104 STBY_WDT
----------------- ----------------- ----------------- 00
00345 000333 00345
VERIFYING THERE IS AN 8 BLINK ERROR
1. Disconnect all inputs to the TV.
2. Cycle AC Power.
2. Cycle AC Power.
(Unplug and plug AC Cord from the AC Outlet).
3. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
Resetting the TV Factory Condition.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Check Diagnosis History”
on page 35
.
RESETTING THE TV TO FACTORY CONDITION
Verify before proceeding to the next step:
;
Verified the error is an 8X error
1. To reset the TV, follow the instructions for
Resetting the TV
to Factory Condition.
2. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
Updating the Software.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Check Diagnosis History”
on page 35
.
UPDATING THE SOFTWARE
Verify before proceeding to the next step:
;
Verified the error is an 8X error
;
Reset the TV to Factory Condition
1. Check for latest Software Version through Network
Connection or Reference Library.
2. Connect and Configure TV Network Connection.
Click on the first or last page to see other XBR-55HX955 / XBR-65HX955 service manuals if exist.