Read Sony XBR-55HX950 / XBR-65HX950 Service Manual online
XBR-55HX950/65HX950 38
SECTION 5 - UPDATES AND ADJUSTMENTS
VERIFYING THERE IS AN 8 BLINK ERROR
1. Disconnect all inputs to the TV.
2. Cycle AC Power.
2. Cycle AC Power.
(Unplug and plug AC Cord from the AC Outlet).
3. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
Resetting the TV Factory Condition.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Check Diagnosis History”
on page 36.
RESETTING THE TV TO FACTORY CONDITION
Verify before proceeding to the next step:
;
Verified the error is an 8X error
1. To reset the TV, follow the instructions for
Resetting the TV
to Factory Condition.
2. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
Updating the Software.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Check Diagnosis History”
on page 36.
UPDATING THE SOFTWARE
Verify before proceeding to the next step:
;
Verified the error is an 8X error
;
Reset the TV to Factory Condition
1. Check for latest Software Version through Network Connection
or Reference Library.
2. Connect and Configure TV Network Connection.
3. Display the menu by pressing
3. Display the menu by pressing
HOME
.
4. Using and
on the on the Remote Commander,
select the following:
Settings
Product Support
Software Update.
NOTE: If TV is not connected to a network go to
http://www.
sony.com/asp
and download the latest software for these
models and Install using a USB Thumb Drive.
5. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Replacing the Main Board” on page 39
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Check Diagnosis History” on
page 36
.
Click on the first or last page to see other XBR-55HX950 / XBR-65HX950 service manuals if exist.