Read Sony XBR-52LX905 / XBR-60LX905 (serv.man3) Service Manual online
XBR-52LX905/60LX905
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
201
1-474-221-11
GE4B (POWER) BOARD, COMPLETE
(XBR-52LX905 ONLY)
201
1-474-220-11
GE4A (POWER) BOARD, COMPLETE
(XBR-60LX905 ONLY)
202
4-172-021-01
BRACKET, TERMINAL T
203
A-1782-496-A
BUHS BOARD, COMPLETE
NOTE: For BUHS Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BUHS Board or LCD Panel.
NOTE: Final software is not installed on this BUHS Board.
Install the update after replacing this board using the instructions
provided with the software.
204
A-1768-718-A
BRACKET, SIDE JACK T ASSEMBLY
205
1-754-692-21
ANTENNA
206
1-754-692-11
ANTENNA
207
1-487-819-11
CARD, WIRELESS LAN
*
2-345-219-11
+B IB 3X-- CM3
2-580-592-01
SCREW, +PSW M3X8
2-580-590-01
SCREW, +PSW M3X5
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-4. GE4B/GE4A (POWER) BOARDS, BUHS BOARD, WIFI ANTENNAS AND
WIRELESS LAN CARD REMOVAL
A Remove screws from GE4B/GE4A (Power) Boards
5 from GE4B/GE4A (Power) Boards
B Disconnect 6 connectors from GE4B/GE4A (Power) Boards
C Slide Terminal Bracket to left-side to remove from BUHS Board
D Disconnect 5 connectors from BUHS Board
D Disconnect 5 connectors from BUHS Board
E Remove 9 screws from BUHS Board
F Slide Side Jack Bracket to right-side to remove from BUHS Board
G Remove 3 screws from B Frame Left to detach from LCD Panel
H Remove 5 screws from B Frame Right to detach from LCD Panel
I Remove 1 screw from Antenna to detach from Bottom Horizontal Frame
J Remove 1 screw from Antenna to detach from Vertical Frame Left
K Remove 2 screws from WIFI Card to detach from LCD Panel
J
A
K
B
C
D
E
F
I
G
H
206
207
201
202
203
204
205
Click on the first or last page to see other XBR-52LX905 / XBR-60LX905 (serv.man3) service manuals if exist.