Read Sony XBR-52HX905 Service Manual online
XBR-52HX905
30
SERVICE ADJUSTMENTS
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM. If the DIGITAL Service
Menu is not displayed, press
JUMP or OPTIONS on the
Remote Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID
PID
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
655738A2
34420000
XXXXXXXXXX
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name Model ID
Product
ID
Code
Name
XBR-52HX905 655736A2
34420000
2b-1
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-7. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
Click on the first or last page to see other XBR-52HX905 service manuals if exist.