KV-XV29M50 - Sony TV Service Manual (repair manual). Page 7

Read Sony KV-XV29M50 Service Manual online

– 7 –
KV-XV29M50
RM-GA002
1-10. PICTURE TUBE  REMOVAL
Note:
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
Remove Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
• REMOVAL OF ANODE-CAP
Note:
• After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or
carbon paint on the CRT.
REMOVING PROCEDURES
Turn up one side of the rubber cap in the direction
indicated by the arrow a.
Using a thumb pull up the rubber cap firmly in the direction
indicated by the arrow b.
When one side of the rubber cap is separated from the
anode button,  the anode-cap can be removed by turning
up the rubber cap and pulling it up in the direction of the
arrow 
c.
HOW TO HANDLE AN ANODE-CAP
Do not damage the surface of anode-caps with sharp
shaped objects.
Do not press the rubber too hard so as not to damage
the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built
into the rubber.
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the
rubber.
a
a
C
 Anode Button
b
b
6
 Earth Coating Assy
qs
 Anode Cap Removal
5
 Band, DGC Removal (x1)
8
 C Board Removal
9
 Chassis Assy Removal
0
 VM Board Removal
qd
 Holder, DGC Removal (x2)
4
 Spring Tension Removal (x1)
qg
 Screw Tapping
     7+ Crown Washer
qf
 Degaussing Coil
7
 Loosen the Neck Assembly
fixing screw and removal
qa
 Loosen the Deflection Yoke
fixing screw and remove
Page of 66
Display

Click on the first or last page to see other KV-XV29M50 service manuals if exist.