Read Sony KV-XV29M50 Service Manual online
– 3 –
KV-XV29M50
RM-GA002
Diagnosis
Item
Description
• No Power
• +B overcurrent
(OCP)
• Vertical NG.
• IK (AKB)
• Supply Voltage
Protection
Detected
Symptoms
• Power does not come on.
• No power is supplied to the
• No power is supplied to the
TV.
• AC power supply is faulty.
• Power does not come on.
• Load on power line is shorted.
• Load on power line is shorted.
• Has entered standby state
after horizontal raster.
• Vertical deflection pulse is
stopped.
• Power line is shorted or power
supply is stopped.
• No raster is generated.
• CRT cathode current detection
• CRT cathode current detection
reference pulse output is
small.
small.
• No power supply to CRT
ANODE.
• No RASTER is generated.
SELF DIAGNOSTIC FUNCTION
No. of times
STANDBY
Indicator flashes
Does not light
2 times
4 times
5 times
8 times
Diagnostic Result
on screen display
—
2:0
2:1 ~ 255
4:0
4:1 ~ 255
5:0
5:1 ~ 255
8:0
8:1 ~ 255
Probable
Cause
Location
• Power cord is not plugged
in.
• Fuse is burned out (F4601)
(F Board)
• H.OUT (Q511) is shorted.
(A board)
• IC751 is shorted.
(C/CV Board)
• +13V is not supplied.
(A Board)
• IC503 voltage list is faulty.
(A Board)
• Video OUT (IC751) is faulty.
(C Board)
• IC001 is faulty. (A Board)
• Screen (G2) is improperly
• Screen (G2) is improperly
adjusted.
• IC604 faulty.
• IC607 faulty.
• IC607 faulty.
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY Indicator will automatically begin
to flash.
The number of times the STANDBY Indicator flashes translates to a probable source of the problem.If an error symptom
cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal
past problems and how often these problems occur.
to flash.
The number of times the STANDBY Indicator flashes translates to a probable source of the problem.If an error symptom
cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal
past problems and how often these problems occur.
1. DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY Indicator will flash a number of times to indicate the possible cause of the
problem. If there is more than one error, the Indicator will identify the first of the problem areas.
problem. If there is more than one error, the Indicator will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen. No error has occured if the screen displays a “0”.
2. STANDBY INDICATOR BLINKING PROCESS
The example above represents for 4 times blink
Lamp OFF 3 seconds
Lamp ON 300ms
Lamp OFF 300ms
3. STANDBY INDICATOR ON TV FRONT PANEL
Standby indicator
Click on the first or last page to see other KV-XV29M50 service manuals if exist.