KV-XV29M50 - Sony TV Service Manual (repair manual). Page 13

– 13 –

7, -

All the data becomes the values in memory.

8, -

All user control goes to the standard state.

[Display], -

Service data initialization (Be sure not to use usually.)

2, 5

Select Device or Category (Up, Down)

Item Number 000 HPOS
This explanation uses H POSITION as an example.
1. Select "000 HPOS" with the 

1

 and 

4

 buttons, or 

2

 and 

5

.

2. Raise/lower the data with the 

3

 and 

6

 buttons.

3. Select the optimum state. (The standard is IF for PAL reception.)
4. Write with the [MUTING] button. (The display changes to WRITE.)
5. Execute the writing with the 

-

 button. (The WRITE display will be changed to red color while excuting, and back to

SERVICE.)

Example on screen display :-

Use the same method for all Items. Use 

1

 and 

4

 to select the adjustment item, use 

3

 and 

6

 to adjust, write with [MUTING],

then execute the write with 

-

.

Note : 1. In [WRITE], the data for all items are written into memory together.

2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective input

signal after adjustment.

031

1111

50

NTSC3 65553

HPOS

0001

GEOM

SUS01

000

3.50M

FF FF

SERVICE

031

1111

50

NTSC3 65553

HPOS

0001

GEOM

SUS01

000

3.50M

FF FF

WRITE

031

1111

50

NTSC3 65553

HPOS

0001

GEOM

SUS01

000

3.50M

FF FF

WRITE

GREEN

GREEN

Write with [MUTING]

Write executed with - 

RED
The WRITE display
then the display
returns to green
SERVICE.

Adjusted with 3 
and 6 buttons.