Read Sony KV-XS29M31 Service Manual online
–
10
–
KV
-XS29M31/33/50/60/63/65/93
-XS29M31/33/50/60/63/65/93
RM-954
KV
-XS29M39/69/87/89
-XS29M39/69/87/89
RM-953
5
Using Your New TV
Using Y
our New TV
Front of TV
1
2
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• If both
(S video input) and … 1 (video input) at the rear of your TV
are input at the same time, the
(S video input) is automatically
selected. To view … 1 (video input), disconnect the S video cable.
• Do not connect video equipment to … 3 (video input) at the front and
the rear of your TV at the same time; otherwise the picture will not be
displayed properly on the screen.
displayed properly on the screen.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Insert the batteries
into the remote
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tips
• If you want to stop the automatic channel presetting, press MENU twice.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop the automatic channel presetting, press MENU twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 30).
Note (KV-XS29M89/M87 only)
• During automatic channel presetting, your TV screen will indicate “B/G”,
• During automatic channel presetting, your TV screen will indicate “B/G”,
“I”, “D/K” or “M” for the TV system (“TV SYS”).
6
Using Your New TV
WOOFER
(8 )
1
2
3
L(MONO)
R
R
L
Y
CB
CR
3D WOOFER
Rear of TV
1
2
Black wire
Red wire
Connecting the 3D WOOFER
1
Attach the 3D WOOFER into the footholds on the top of your TV.
2
Connect the wires to the 3D WOOFER (8
Ω
) terminals at the rear of your TV.
The red wire should be connected to the ‘ red terminal and the black wire
to the ’ black terminal.
to the ’ black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.
with the neighbouring speaker terminal.
You can enjoy high quality sound by connecting the 3D WOOFER.
Click on the first or last page to see other KV-XS29M31 service manuals if exist.